-
Anonymous users2024-01-24First, you look at whether there is glue around the glue pot, exposing the glue, etc., which causes the glue to flow to the edge of the conveyor belt during the gluing process, and after cooling and solidifying, it passes through the travel switch, and drives the travel switch, resulting in the action of the cutter. The second depends on whether the wire of your travel switch is loose, causing the wire to fall, and the cutter moves in advance when the plate passes. The third depends on whether your machine has been repaired, the travel switch is not in the original position, closer to the direction of the rubber pot, resulting in the plate as soon as it enters the machine to cut the tape, and the fourth depends on whether it is a problem with your circuit, which should be called machine repair.
Domestic, Nanxing's edge banding machine is good, and it is very well-known in the country. >>>More
If you are not familiar with anything, you have to set up your own factory? I advise you to be cautious.
In fact, it mainly depends on which price range you plan to buy. Now the equipment, as long as the price is at the level, the brand is not very important, and the quality is very good. You can choose a professional dealer to help you with your purchase.
In general, it is distinguished by the eyes. A slightly better color card, a better colorimeter,
That's a lot: the most commonly used is white latex (for pressing MDF), puzzle glue (also called assembly glue, generally solid wood puzzle is used for this)), yellow glue (for assembling semi-finished products), veneer glue (for veneer), hot melt glue (for edge banding), spraying glue (for sticking sponge), all-purpose glue (this kind of glue is used less, generally used for veneering cloth or veneer), AB glue (similar to the use of universal glue), instant adhesive (also called 502, usually used to make up for some small scars, small cracks or something). Others are used sparingly.