Can a wood plastic ceiling be installed with a ceiling lamp?

Of course, there must be a frame inside the ceiling, and the frame is made of wood, which can be fixed on the wooden frame inside. Don't tell me your ceiling doesn't have a frame. Because that's not possible. >>>More

It can be changed, and the following needs to be noted:

1.The weight of the downlight is relatively light, so the ceiling in this position should not be reinforced; >>>More

The wire should be threaded into the insulating sleeve and the strength should be separated. IF THERE IS NO CEILING ON THE CEILING, ASK THE ELECTRICIAN TO OPEN A 20 10MM FINE GROOVE ON THE CEILING UNTIL THE POSITION WHERE YOU WANT TO INSTALL THE LAMP, AND THEN PRE-EMBED 2 LIGHTING LINES, AND THEN ASK THE PAINTER TO FILL IT.

Yes, it can be installed. However, you have to prefix a wooden board on the position where the ceiling light needs to be installed in the integrated ceiling, and then when installing the ceiling lamp, the screws will pass through the gusset of the integrated ceiling to the wooden board, so that it can be fixed firmly. In addition, if the weight of the ceiling lamp is heavier, then the wooden board should be connected with the top surface of the original building, which can be fixed with suspension bars and expansion screws, so as to ensure that after the ceiling lamp is installed, the integrated ceiling will not have the problem of sinking.

It can be installed in the living room, it is very good-looking, but it is also necessary to pay attention to some problems (1) When installing the suction back ceiling lamp in the masonry structure, embedded bolts should be used, or expansion bolts, nylon plugs or plastic plugs should be used to fix; Do not use wooden wedges. And the bearing capacity of the above fixings should match the weight of the ceiling lamp. To ensure that the ceiling lamp is securely fixed, reliable and can extend its lifespan. >>>More