-
Anonymous users2024-01-23It can be changed, and the following needs to be noted:
1.The weight of the downlight is relatively light, so the ceiling in this position should not be reinforced;
2.It is possible to change to a ceiling lamp, of course, the weight should not be too heavy, the weight of the crystal ceiling lamp is relatively heavy, and it must be reinforced before it can be installed;
3.The weight of the chandelier is heavier, and it needs to be reinforced before installation;
Note: The furniture only needs to install a hanging bar from the original floor surface, and the weight can be placed on the floor surface;
It also depends on the distance between the ceiling and the original top surface, and the distance is too high, which may lead to the poor installation of the ceiling.
-
Anonymous users2024-01-22Yes, you can make two holes with an electric hammer, use a wooden hazel or expansion tube, and fix the lamp on it with screws.
-
Anonymous users2024-01-21Press it directly on the top of the rough wall, dizzy, the high room is not easy to get, and it's ugly to say.
-
Anonymous users2024-01-20Yes, many of them are installed directly on the floor slab.
Crystal lamps have diode lighting and energy-saving lamp lighting, if you want to use energy-saving lamps better, cleaning is simpler than chandeliers. If you want a ceiling lamp to be warm, you also need to look at the color of the light.
Yes, LED ceiling lights are generally used now, and the connection method is more convenient with less power.
OK. There are no restrictions on the installation and use of downlights. The function of the downlight is to supplement the light, like a downlight can be placed in a place where the lighting is insufficient. Or if you feel that the original lamp is more power-hungry, you can install a downlight to use it. This can also be seen according to the actual situation. >>>More
It can be installed in the living room, it is very good-looking, but it is also necessary to pay attention to some problems (1) When installing the suction back ceiling lamp in the masonry structure, embedded bolts should be used, or expansion bolts, nylon plugs or plastic plugs should be used to fix; Do not use wooden wedges. And the bearing capacity of the above fixings should match the weight of the ceiling lamp. To ensure that the ceiling lamp is securely fixed, reliable and can extend its lifespan. >>>More
Yes, it can be installed. However, you have to prefix a wooden board on the position where the ceiling light needs to be installed in the integrated ceiling, and then when installing the ceiling lamp, the screws will pass through the gusset of the integrated ceiling to the wooden board, so that it can be fixed firmly. In addition, if the weight of the ceiling lamp is heavier, then the wooden board should be connected with the top surface of the original building, which can be fixed with suspension bars and expansion screws, so as to ensure that after the ceiling lamp is installed, the integrated ceiling will not have the problem of sinking.