-
Anonymous users2024-01-23Of course, there must be a frame inside the ceiling, and the frame is made of wood, which can be fixed on the wooden frame inside. Don't tell me your ceiling doesn't have a frame. Because that's not possible.
With such a large top, it's strange that the middle of the frame is not concave. The material of the ceiling is not steel plate.
-
Anonymous users2024-01-22It can be installed, the general energy-saving lamps will not be high, and the light ceiling lamp can be screwed on directly, and the heavy one should be reserved by the carpenter in advance to reinforce it on the top.
-
Anonymous users2024-01-21Can be installed, first reserve the wire for loading the lamp, tell the construction workers before the ceiling where you install the lamp, let them play the "well" shaped keel at the position of the lamp, the keel density can be appropriately larger, and when installing PVC, the position of the keel is drawn on the side of the PVC to the ground, so that when installing the lamp, you can use the self-tapping screw to align the position with the keel to install the lamp (the lamp is through the PVC to the keel), the spotlight is more troublesome, to make a round hole in the PVC, The position of the keel can be ordered a plywood, drill holes on the board, connect the wire to the hole and embed it directly.
It can be changed, and the following needs to be noted:
1.The weight of the downlight is relatively light, so the ceiling in this position should not be reinforced; >>>More
It can be installed in the living room, it is very good-looking, but it is also necessary to pay attention to some problems (1) When installing the suction back ceiling lamp in the masonry structure, embedded bolts should be used, or expansion bolts, nylon plugs or plastic plugs should be used to fix; Do not use wooden wedges. And the bearing capacity of the above fixings should match the weight of the ceiling lamp. To ensure that the ceiling lamp is securely fixed, reliable and can extend its lifespan. >>>More
Yes, it can be installed. However, you have to prefix a wooden board on the position where the ceiling light needs to be installed in the integrated ceiling, and then when installing the ceiling lamp, the screws will pass through the gusset of the integrated ceiling to the wooden board, so that it can be fixed firmly. In addition, if the weight of the ceiling lamp is heavier, then the wooden board should be connected with the top surface of the original building, which can be fixed with suspension bars and expansion screws, so as to ensure that after the ceiling lamp is installed, the integrated ceiling will not have the problem of sinking.
To install the yin angle line, you need to draw the horizontal line of the yin angle line on the wall to be installed, and it should be noted that this horizontal line is measured from the floor of the house, and the horizontal line cannot be measured downward from the position of the ceiling. After that, we have to drill holes in the wall along the upper part of the horizontal line that we have just drawn, about every half a meter, and then we will stuff wooden wedges into the holes. >>>More
Personal vision is ok. Know how to appreciate and adjust a positive attitude. It is recommended to put it simply, if the funds are not enough, only a partial ceiling can also be.