-
Anonymous users2024-01-24It is possible to purchase a toilet displacer, which can be solved. However, if the toilet is installed the location of the drain pipe is greater than or equal to 110The outer diameter of the toilet ceramic outlet is normally less than 80mmDifference 20mm is mountable.
-
Anonymous users2024-01-23If you can't fit it, you can only buy a toilet with a small hole spacing.
-
Anonymous users2024-01-22Your toilet pit is not standard, generally there are only two specifications 300 and 400, since it is already 380, you can only find a way to dig out some of the wall, fortunately only 2 cm, not very obvious.
-
Anonymous users2024-01-21If it is a net remaining 380, the nominal eye distance of the domestic brand toilet is 400, and the general actual eye distance is 380, you have to accurately measure the distance between these two positions, if it is accurate, it should be just able to be installed.
<> no, 380 pit distance and 400 toilets 380 and 400 refer to the distance of the toilet drain from the wall. That is, the hole distance between the toilet and the wall is 38cm and 40cm, if the pit spacing is greater than the toilet, then it can be installed by corresponding adjustments, and the 380 pit spacing can only install the toilet of 380 or below 380, and the toilet of 400 can not be installed.
Regarding the problem that the toilet bowl 370cm is forcibly installed at a distance of 400 pits, whether it will leak or be easily clogged in the future, before buying the toilet. Reflect the situation at home to the business. It's bricked. >>>More
It turns out that 300 pit spacing cannot be installed with 400 pit spacing toilets.
The toilet is a must-have product in every bathroom, and there are many factors to consider when purchasing and installing, such as brand, material, style, as well as the height of the toilet distance and the pit distance of the toilet. Therefore, today's article mainly introduces the toilet pit distance of 300 or 400, and how to measure the toilet pit distance. >>>More
It is best to choose a 300 hole spacing. If the 350 does not contain wall tiles, it is estimated that it will definitely not fit, but you can use a shifter. Hope it helps.