-
Anonymous users2024-01-24If it is an old-fashioned float tank fitting, it may be that the height of the float is not adjusted properly, or the valve for water inlet is open.
If it is a new tank fitting without a float, it may be that the water inlet part is too tight or fails.
Actually, it's a very simple thing, but the text is not very clear. Generally, toilets come with installation instructions for tank fittings, you can look at the manual, or go to a building materials store to find one.
If it doesn't work, and your home is an old-fashioned float tank fittings, it is recommended that you buy new tank accessories and find someone to replace them, the price of the tank accessories is about 30-50 yuan.
1. Open the lid of the toilet, and you can see the inlet valve of the toilet, which is the blue lid in the picture. 2. Use a slotter driver to adjust the float counterclockwise to adjust the screw, and lower the float. 3. Find a green thing on the inlet pipe, each toilet may be different in color, but the position and shape are similar. >>>More
Most likely is that the position of the inlet valve is wrong, that is, it may be a little crooked, leaning against the wall of the tank, take out the inlet valve, and then reinstall it, it should be fine. Otherwise, there is a foreign object in the pipe of the inlet valve, and once it was the same situation, and as a result, a moth came out of the pipe of the inlet valve, how did B get in.
Check to see if the ball valve inside is not in the specified position, it may be that the ball valve is stuck and the water inlet pipe is closed and water cannot be entered.
There may be a problem with the inlet pipe, the connection between the water balance and the inlet pipe is estimated to be a bit of a problem, and the quantitative problem of the float can not be measured very prepared.
Clean the water tank of the toilet, the water over the sink will not be a problem.