Is the hot water enough for the wall hung stove with a three bedroom room, and the kitchen and bathr

Updated on Kitchen 2024-07-10
4 answers
  1. Anonymous users2024-01-24

    The wall-hung boiler of 24KW (output power) provides a hot water flow of about 10 liters per minute (the temperature rises by 30 degrees, if the temperature rises by 25 degrees, the hot water flow rate per minute is about 13 liters), the flow rate of the hot water faucet is mostly 7-10 liters minutes, and the hot water flow rate of the shower is mostly 8-12 liters, so as long as the bathroom and kitchen do not use hot water at the same time, use one place separately, and the flow rate is sufficient; If you use it at the same time, the water temperature will be low or unstable, and it is relatively better in summer

  2. Anonymous users2024-01-23

    The floor area of the room, the number of bathrooms, the diameter of the shower and the presence of a bathtub are required.

  3. Anonymous users2024-01-22

    You can install a water tank, and you will have no problem using it.

  4. Anonymous users2024-01-21

    I have information in my space. A phone is required.

Related questions
2 answers2024-07-10

This is really a bit difficult, basically it is difficult to save gas, but you can save some from some usage habits. >>>More

2 answers2024-07-10

This depends on the distance between your kitchen and bathroom, and whether your hot water pipe has been insulated, or it may be because the temperature of the freshly boiled water is not high enough.

3 answers2024-07-10

It is recommended to figure out whether the switch mentioned above is to control the domestic hot water or the heating system, if it can control the heating system, there is no need to install a thermostat, if it is only used to control domestic hot water, it is recommended to install an indoor thermostat, according to the indoor temperature, to control the heating system of the wall-hung boiler, which is more energy-saving and comfortable.

5 answers2024-07-10

Hello! When installing the waterway, there is an angle valve at the position where the faucet is connected to the water pipe, see if it is opened, it is generally hot on the left and cold on the right, that is, there should be two angle valves at the position of the water pipe connected to the wall under your faucet. Look at the one on the left to see if it's open. >>>More

2 answers2024-07-10

The reason for the wall-hung boiler itself: the unique phenomenon of inferior "casing machine" in the wall-hung boiler products, because of the casing heat exchanger installed in it, the sanitary hot water is generated by the tubular heat exchanger integrated in the main heat exchanger, and the sanitary hot water is not very stable, so there will be the phenomenon of cold and heat. This phenomenon of high-quality wall-hung boilers can be better, and there are more such phenomena in general wall-hung boilers.