-
Anonymous users2024-01-23Hello! When installing the waterway, there is an angle valve at the position where the faucet is connected to the water pipe, see if it is opened, it is generally hot on the left and cold on the right, that is, there should be two angle valves at the position of the water pipe connected to the wall under your faucet. Look at the one on the left to see if it's open.
If there is only one water pipe, it means that there is no hot water pipe, and of course there is no hot water.
The kitchen installs a wall-hung stove, but the hot water in the bathroom is always not hot, and the reason for the hot water and cold water for a while:
The wall-hung boiler is hot and cold with hot water. It should be said that it is not a fault of the furnace. Because when the setting temperature is low or the water output is small, the boiler will stop when it reaches the set temperature quickly; At this point, cold water comes out.
When the temperature drops, the furnace restarts, and hot water comes out again, and so on. You can set the temperature of the hot water to a higher level, or increase the amount of water output; By keeping the furnace in a continuous working state, you can avoid the phenomenon of hot and cold for a while.
-
Anonymous users2024-01-22There is no hot water in the bathroom washbasin.
It should be that the hot water pipe is connected and there is no hot water.
It is recommended to ask a plumber and electrician to check whether it is connected
Alternatively, the triangle valve is not opened for reference.
-
Anonymous users2024-01-21It's because of your bathroom faucet, and the line of his house is another one.
-
Anonymous users2024-01-20Generally, when the waterway is installed, there is an angle valve at the position where the faucet is connected to the water pipe, see if it is opened, it is generally hot on the left and cold on the right, that is, there should be two angle valves at the position of the water pipe connected to the wall under your faucet. Look at the one on the left to see if it's open. If there is only one water pipe, it means that there is no hot water pipe, and of course there is no hot water.
-
Anonymous users2024-01-19The bathroom washbasin does not produce hot water, and the banquet should be completed after the hot water pipe is connected, and it is recommended to ask a plumber to check whether it is connected, or is the triangle valve Xiangsen, whether it is opened for reference.
This should be the pipe at home is relatively thin, or the water pressure is not very stable, caused, the faucet boiling water is the pressure in the pipe is reduced, when the faucet is closed, the pressure in the pipe increases, the sensitivity of all the newly installed elements of the wall-hung boiler is still there, the linkage switch response is more sensitive, when the water pressure is reduced and the water flow switch is increased, the gas switch will also be turned on, the exhaust fan will also touch the power, there will be an instant action This is the reason for the sound, when opening the faucet, try to move the handle to the cold water side, Do not place in the middle position and check that the water pipe valve is open to the maximum
Then find a wall-hung boiler manufacturer, or find a professional after-sales ......Ride ......Soldier.
The opening of the kitchen window should have nothing to do with the gas consumption of the gas wall-hung boiler, and it will not consume more gas because the kitchen window is open.
If there is a problem, you can ask the developer to replace or repair it.
The heating is not hot, and the new product performance should work. The only possibility is that the power is too small and the house is too large, 109 square meters.