The toilet tank does not get water

Check to see if the ball valve inside is not in the specified position, it may be that the ball valve is stuck and the water inlet pipe is closed and water cannot be entered.

If there is a problem with the toilet water parts, see if it can be repaired, if it can't be repaired, just replace it with a set of water parts.

There is a problem with the connection between the inlet pipe and the ball valve! Let the community property come to help you take a look!

Pull the accessories hanging in the water tank and you will enter the water.

The valve is not properly adjusted.

1. You have to determine whether there is tap water, and turn on the tap water switch, that is, the angle valve.

2. Take the lid of the water tank open, and you can see the accessories in the water tank. The toilet tank fittings are normally divided into three parts: the first is the drain valve, which is under the reverse of the lid button; The second is the inlet valve, which is the connection of the outer hose of the toilet; The third button is just below the drain valve.

3. After checking the toilet lid, will it reach the inlet valve? If so, just reorient the inlet valve. Then look at the floating bucket or float of the water inlet valve will flow up and down freely?

It's a hub, because if you get stuck, the water can't enter normally, and the normal floating bucket has a toilet layout diagram on it. There is a crosseye that can be adjusted, the height of the floating barrel can be adjusted, and it rotates according to the indicators. If the toilet is newly installed, damage to the inlet valve is unlikely, and it is mainly caused by improper installation by the installer.

The problem you're talking about isn't complicated at all, as long as you do the following:

1.You have to make sure that there is running water, and turn on the tap water switch, which is the angle valve

2.Press the lid of the water tank to open it, and you can see the accessories inside the water tank The toilet tank accessories are generally divided into three parts, the first is the drain valve, which is directly below the lid button The second is the water inlet valve, which is outside the toilet.

The hose that is connected next to the drain valve and the third one is the button

3 Check that after the toilet lid is closed, will it reach the inlet valve? If so, reorient the inlet valve.

Just look at the floating bucket or float of the inlet valve to see if it can move up and down freely? This is the key because of the card.

If you get there, the water won't get in, and the floating bucket usually has an adjustable crosseye that can be adjusted to adjust the floating bucket.

height, you rotate in the direction of the clock, and the problem should be solved

Your toilet is newly installed The current toilet has been tested before leaving the factory It is unlikely that the inlet valve is bad It is mainly caused by improper installation by the installer You can do it yourself If you still don't understand, you can send me a message My Taobao store: Xitao Taobao bathroom home.

Repair and replace the toilet float valve.

If the new toilet does not enter the water, check whether the water supply line is blocked.

If the toilet does not enter the water after a long time, you just need to disassemble the lid of the water tank and press the float down.

If this is often the case, you can attach a weight to the float (the weight is tested yourself).

After a long time, whether the float stood still. Make a move.

Try moving the float in the tank.

After a long time, check if the joints are flexible or if they are stuck in something! It's okay, it's not dirty.

Check the float or see if the inlet valve is closed.

There's a pot, right? You know what to do!