-
Anonymous users2024-01-24Allow it to air dry naturally to avoid mold, and never expose it to the sun.
If there is a metal connection, wipe it dry to avoid rust and corrosion.
If there is any damage, it is best to take it to a professional repair service for repair.
If there is a phenomenon of paint peeling, it is best to ask a professional to paint and repair.
-
Anonymous users2024-01-23Move to a ventilated place, cool and dry, not suitable for sun exposure.
1.It is best to use natural air-drying methods for soaked furniture, and you can also turn on the dehumidifier to completely evaporate the moisture of the furniture, at least return to the dry state first, so that it will not be put for a long time, and there may be mold inside. >>>More
Wipe the surface dry with water stains, then place it in a ventilated and cool place to dry, never basking in the sun.
If the floor is already wet, be sure to open the floor, stand upright in the room and dry it naturally, if it is not deformed, it can also be installed and continued to be used, if it is deformed, it can only be replaced with a new one. Be sure not to dry in the sun or hair dryer. It's best to find a professional to come to the site to take a look and make an assessment of the loss, which can be used as the basis for future claims.
1. If the whole is soaked for a day, then the connection point should be checked, the gypsum board is a little waterproof, but the looseness of the gypsum itself will also change after the secondary drying. >>>More
Hardwood parquet is blistered, if the water area is not large, quickly wipe dry with dry hair, if the water area is relatively large, it can only be replaced, after all, the floor is most afraid of soaking water, a bubble will arch, blister, deformation, mold.