-
Anonymous users2024-01-24Hardwood parquet is blistered, if the water area is not large, quickly wipe dry with dry hair, if the water area is relatively large, it can only be replaced, after all, the floor is most afraid of soaking water, a bubble will arch, blister, deformation, mold.
-
Anonymous users2024-01-23Carefully dry it in a cool place, it is easy to lose shape when dried in the sun.
If it doesn't deform when it dries, congratulations, continue to use this door.
If it is deformed by drying, throw this one away, and change the door.
I just finished decorating and looked at a lot, and finally decided on a round floor. The quality is really nothing to say, the service attitude is top, friends with wooden floors go to see it, and the laminate floor blisters are fine.
If the floor is already wet, be sure to open the floor, stand upright in the room and dry it naturally, if it is not deformed, it can also be installed and continued to be used, if it is deformed, it can only be replaced with a new one. Be sure not to dry in the sun or hair dryer. It's best to find a professional to come to the site to take a look and make an assessment of the loss, which can be used as the basis for future claims.
1.It is best to use natural air-drying methods for soaked furniture, and you can also turn on the dehumidifier to completely evaporate the moisture of the furniture, at least return to the dry state first, so that it will not be put for a long time, and there may be mold inside. >>>More
1. If the whole is soaked for a day, then the connection point should be checked, the gypsum board is a little waterproof, but the looseness of the gypsum itself will also change after the secondary drying. >>>More
Wipe the surface dry with water stains, then place it in a ventilated and cool place to dry, never basking in the sun.