-
Anonymous users2024-01-24The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.
-
Anonymous users2024-01-23The toilet flush is weak, don't rush to spend money to repair, twist this small mechanism to solve it easily, increase experience, great life tips, life tips, home hacks, I hope it can help everyone, thank you!
-
Anonymous users2024-01-22Flush a few more times My toilet flushes twice
The storage water level in the toilet pit (in the reverse bend) has been designed when the product is designed and manufactured, and it cannot be changed after the production is completed, and the water storage capacity of the storage tank can be adjusted.
For household flushing toilets, if you feel that the flush force is relatively small, then it must be a problem caused by the toilet tank. This is not a direct consequence of the lack of water pressure in your own home, because most toilet flushes are flushed out by the inertia and pressure of the water in the inner tank behind the toilet. >>>More
The toilet is not able to pump water, which is a problem that every family encounters. So what is the reason for it? And how do we solve it? >>>More
The toilet flush is not enough, and the toilet is not flushed clean, which may be a problem with the toilet shifter, that is, the water outlet of the toilet is not directly facing the sewer pipe, and there is a curve in the middle, which is connected when the toilet is installed. It is also possible that the toilet is blocked, after the toilet is blocked, when flushing, the water level will slowly rise, and the toilet will not be flushed. It is also possible that when you use it, you don't have a good reason to do it, and you don't let go when you press the flush button, which will also cause the impulse to be insufficient, and you must press it for 2-3 seconds, so that you can completely open the flush valve, and the flushing effect can be the best.
Insert a pipe next to the inlet rod in the tank fitting into the overflow pipe of the outlet fitting.