The toilet water cover is too low, how to improve the water cover?

In this case, I feel that the water supply pipe in the water tank is pulled out on the line, the water supply pipe is a hose that extends out of the water valve alone, generally when leaving the factory, the hose will be inserted in the overflow hole of the flush valve, it is to prevent the toilet from storing less water, and it can not be flushed clean when the sewage is discharged, but it is often counterproductive, many times it is always not too much water, and some people think that the toilet is wrong, the toilet is always leaking, in fact, it is not, you first check to see if the hose is inserted on it.

There are some toilets that can be adjusted, and most toilets have non-adjustable water seals.

The float rises and the water level is upgraded, on the contrary, the water level is lowered, and the compass is screwed forward to the water level according to your needs, and the two ends of the steel plate clamp are lowered and moved up and down.

If you can't adjust it, you can put a tissue on the water beforehand.

Toilet water seal refers to the water column with a certain height in the toilet bowl to prevent gas from escaping into the room in the drain pipe system. In the building drainage pipe, the water seal refers to the water column of a certain height located under the drainage outlet of the sanitary appliance to resist the change of air pressure difference in the drainage pipe and prevent the gas in the drainage pipe system from escaping into the room. >>>More