How to raise the water level in the toilet pit

1.We lifted the lid of the toilet bowl, taking care to hold it firmly. >>>More

How to adjust the water level in the toilet bowl lower:

1. If you want to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover and have 1 thin leather pipe called the water supply pipe, which is generally inserted into the drainage valve on the right, and pull the right side up directly in the water tank, so that the water in the pit will not be too high when the water enters the water next time. >>>More

I suggest you lower the water level in the tank, and I found that the lower it is, the higher the water level in the pit. Or press for no more than two seconds. Good luck.

You can fill an empty drink bottle with water and put it in the tank.

How to adjust the toilet water level:

There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron, and the iron sheet in the middle of the iron is pulled upwards to be lowered, and the downward is high, and you open the upper lid of the toilet, you can see the ball connecting rod mechanism inside. There is a screw on top of it and you can see that there are screws to adjust it up, and you can meet your requirements. The water level is low, so you can save water. >>>More