-
Anonymous users2024-01-24According to its internal structure, it can be roughly divided into three types of ordinary ball valve flush toilets, self-controlled water-saving flush toilets, and pneumatic flush toilets.
Ball valve flush toilet: Generally, there is a plastic float and a rubber piston in the water tank, plus an inlet pipe and an outlet pipe, and a sewage pipe, which controls the water inlet and outlet of the water tank through the buoyancy of the float, and it is also more convenient to operate, but the service life is not very long, and the price is cheap.
Self-controlled water-saving flush toilet: above the toilet body is a large water tank, a small water tank is placed inside the large water tank, and there is a water inlet control device and a floating body in the small water tank, which is reliable, and the water seal has a good effect, and it is relatively convenient to install and maintain.
Pneumatic flush toilet: using the international advanced high-tech sealed flushing device, the water consumption is less than 6 liters, the straight-line transportation distance reaches 9 meters, and the flushing power is particularly strong! The new base design, shape and pipeline ensure unimpeded drainage, and the reserved water surface is 40% larger than the traditional area, which reduces the cleaning workload and is more expensive.
According to the external structure: there are one-piece toilets, split toilets, and built-in toilets.
One-piece flush toilet: refers to the toilet tank and the base part are connected, therefore, the installation is relatively simple, not easy to hide dirt, and the space occupied is smaller than that of the split. Its shape is relatively simple, novel, and high-end.
Split flush toilet: refers to the toilet tank and the base part are separated, and the base part needs to be connected with the water tank with screws during installation, so the installation is more troublesome, and its connection is easy to hide dirt and is not easy to take care of.
Built-in flush toilet: also known as built-in, mainly refers to the fact that the water tank part of the toilet is embedded in the wall, and only the key part is left on the wall, which is easy to install, and there is no dead corner of dirt, but it is not easy to repair.
Generally, the phenomenon that the water has been flowing non-stop after flushing is the rubber plug cover of the outlet or the mouth has scale, you open the water tank cover, and then find the outlet that is the outlet where the water from the water tank flows to the toilet, and check the rubber cover on it to see if there is scale or wear. Generally, it is because of the poor sealing that it causes long-term running water.
Toilets can be cleaned in several ways:
1. Vinegar descaling. >>>More
Summary. 1. It may be that the inlet pontoon of the toilet is separated by the wall of the water tank or the rest of the parts, and we can adjust the position of the inlet pontoon to the appropriate place. 2. The filter core of the toilet bowl is blocked by foreign objects, we can remove the filter and clean it, and then put it back on. >>>More
I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More
When the sky changes, the sense of smell is particularly sensitive, and the usual smell is easy to dissipate on a sunny day, I think you stink here and there in fact, the reason is not on the sink bend, you are upstairs to make a new toilet 99% of the problem lies in the laying of floor tiles and the treatment of toilets1Your floor tiles are used for dry paving, the so-called dry paving is after the ground is leveled, use yellow sand to put a little cement mixed together to make the floor tile base, and then stick the floor tiles, so that the floor tiles are easier to paste, but the disadvantage is that there is a quick place to leak or water ingress, and the entire floor tile base will be infiltrated. >>>More