-
Anonymous users2024-01-24Generally, the phenomenon that the water has been flowing non-stop after flushing is the rubber plug cover of the outlet or the mouth has scale, you open the water tank cover, and then find the outlet that is the outlet where the water from the water tank flows to the toilet, and check the rubber cover on it to see if there is scale or wear. Generally, it is because of the poor sealing that it causes long-term running water.
-
Anonymous users2024-01-23Open the tank and close the rubber lid.
-
Anonymous users2024-01-22The stop raft in the tank may be stuck, check it, and if you can't do it, you can find a plumber to repair it.
With the development of society now, many things have gradually appeared in our lives, enriching our lives. The flushing toilet is a kind of furniture that is used more frequently now, and it is also relatively convenient to use. But sometimes the toilet will also break, such as the toilet flushes automatically, so it will be a waste of water, and many friends don't know what to do. >>>More
According to what you said, it is most likely not "poor pumping", but "poor drainage" and "poor drainage". Because: "the water in the tank can be drained at one time" means that the pumping is normal, and if the pumping is not clean, it cannot be discharged, the drainage is slow, and there are many dirty things, which cannot be washed away. >>>More
How do you unclog a flush toilet? Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
I believe everyone has encountered a blocked toilet, and it can also be said to be a more common thing in lifeNot only does it directly affect normal life, but it puts us in an awkward position? In fact, after the toilet is blocked, you may not immediately turn to a professional toilet company, you can try it yourself, so what are the methods of flushing the toilet? >>>More
The principle of the flush toilet is mainly the siphon principle, and the schematic diagram of the flush toilet is also based on the siphon principle. The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More