-
Anonymous users2024-01-24Choosing a good CNC cutting machine equipment is not determined by the configuration alone The high configuration is only the quality of the accessories, not the accuracy of the whole machine, a really good machine is determined by the combination of three aspects Indispensable This is also the reason why the price difference is so big why it is called cutting machine on the market.
Machining accuracy (the bed processed by 5 million five-sided milling of imported 5 million guarantees the accuracy of the bed, and must be tempered and aged to ensure that it is not deformed).
2.Assembly accuracy (this depends on the strength of each factory, some factories have not done a few cutting machines, the factory is messy, what machines are also produced, this is not professional, so there is no experience in the production of cutting machines, the price of the machine is low, after the assembly is completed, it must be tested by professional tools to ensure that the accuracy reaches plus or minus millimeters before leaving the factory, only in this way can we ensure that the machine will not be sold scrap iron for about 1 year, because the machine is worn and the accuracy slowly decreases with the time, if the accuracy does not meet the requirements before leaving the factory, After a year, it won't work).
3.Configuration (the quality of good accessories is definitely good, but the really good accessories are good in addition to the quality of the long time and after-sales service, in the good things do not dare to guarantee that they will not be broken for a lifetime, and the broken ones can be solved in time is a good accessory), so the real machine is not determined by the configuration, I hope it can help you.
-
Anonymous users2024-01-23How much do you want to drive? Use an electronic saw for a large amount and a universal saw for a small amount.
Technical strength: check whether the manufacturer really has its own independent R & D personnel. Whether the machine was developed in-house or imitated. >>>More
Jinan production engraving machine manufacturers less than two or three hundred, large manufacturers and big brands to Jinan Gete, Jinan local users, standardized production, large output, can go to Jinan furniture factory to see the actual processing effect.
1. The edge banding of panel furniture is very important, and it is necessary to pay attention to the advantages and disadvantages of the edge banding material, and whether the edge banding is uneven and warped. In particular, it should be noted that it is not edged on all sides - although formaldehyde-free adhesive is used, wood-based panels will have more or less volatile gases in the production process, and the edges are tightly sealed, which is of course good for the environmental protection of the room. >>>More
Maintenance of the machine This is one of the most neglected things, such as: the guide rail is often rubbed with oil to prevent wood chips from entering, causing the guide rail to lock up; The dust wiping of the chassis sometimes leads to insufficient accuracy of the machine because of this interference signal. Take care of the machine, dust removal and maintenance frequently, and the life of the machine will increase accordingly.
High efficiency and high precision. Labor saving, efficient.