Turn on the range hood, what to do if the living room smells

Updated on Living room 2024-07-23
2 answers
  1. Anonymous users2024-01-24

    The odor of the range hood may be that the smoke exhaust pipe and flue are not well sealed, if the smoke exhaust pipe is under the ceiling, it can be sealed with adhesive tape or sealant. If it is above the ceiling, the part that blocks the smoke pipe should be removed and glued with glass glue. It is also possible that the two sides of the exhaust hose are not tightly connected, resulting in detachment or breakage and making it smelly, so it is necessary to replace an exhaust pipe.

  2. Anonymous users2024-01-23

    The simplest and most effective solution on a daily basis is to open the window of the room in the house far away from the kitchen (cooker hood) when it comes to turning on the hood. In this way, fresh air from the surrounding environment enters the room to supplement the air exhausted by the range hood.

    It not only solves the problem of not returning odor, but also ventilates the house by the way.

Related questions
14 answers2024-07-23

1. Change the floor drain: Directly install a floor drain with an anti-odor core during decoration, which is the best choice to prevent odor. It's just that you need to pay special attention to the quality of the deodorant core when choosing a floor drain, otherwise it will break down after two years, and it is no different from not installing it directly. >>>More

5 answers2024-07-23

You observe the movement of the pipeline. There's nothing wrong with going forward. If it's in reverse, it's best to close the toilet door. Turn on the range hood and remember to close the toilet door, so that it is not easy to smell back.

3 answers2024-07-23

The location of the installation is unreasonable, if it is reasonable, it can suck away about 80%, and now a good smokeless pot can not be said to be really smokeless, but the corresponding smoke will be much less, and then make a better exhaust fan on the top of the kitchen.

4 answers2024-07-23

Open and check to replace the seal and also see if it is flat when installed.

1 answers2024-07-23

1. You can put a layer of plastic wrap inside the oil box, and then the plastic wrap is exposed a little outside the oil box, so that the oil smoke and the oil box are separated by a layer of plastic wrap, and what you have to do is to replace the plastic wrap regularly. >>>More