How to choose panel furniture?

1. The edge banding of panel furniture is very important, and it is necessary to pay attention to the advantages and disadvantages of the edge banding material, and whether the edge banding is uneven and warped. In particular, it should be noted that it is not edged on all sides - although formaldehyde-free adhesive is used, wood-based panels will have more or less volatile gases in the production process, and the edges are tightly sealed, which is of course good for the environmental protection of the room.

2. It depends on the firmness of the furniture structure. If the gap between the door and drawer seams of furniture is large, it means that the workmanship is rough and will be deformed after a long time.

3. Pay attention to the selection of painted panel furniture, the paint contains a variety of harmful substances, such as: formaldehyde, benzene, xylene (colorless and odorless, extremely difficult to detect, unconsciously the body has been seriously eroded, damaging health invisibly) soluble lead, soluble mercury, soluble cadmium, all have serious harm to human health, so be cautious about the choice of painted furniture!

4. From the hinge groove and the hole, you can see whether the wood used in the panel furniture is medium density or particleboard, and the best way is to carefully observe the hinge groove and the hole, where the internal structure is exposed, you can see whether the MDF or particleboard is used.

5. The use of hardware and the ability to disassemble and assemble at will is the biggest advantage of panel furniture, so the quality of the connector is closely related to the quality of the whole furniture. High-quality panel furniture is expensive in these details.

Panel furniture is good, there are many advantages, young, fashionable, color choice, variety of styles, and now basically larger brands also support customization First of all, look at what style you drive, generally speaking, many people like all furniture, at least the furniture in a room is a style, tone, the easiest way is to buy in the same house; The second is to look at the price, the price of general panel furniture is relatively affordable, but it also needs to be compared, go to a few more brands, there are too many panel furniture brands in the same store, there are many furniture styles are similar, the same similar furniture, a comparison to know which one is more suitable; Then look at the quality, including the details of the workmanship, can be seen, open the drawer to see, open the cabinet door to see, to see if the hinge, track, handle, screw look good quality panel furniture is generally lighter, but it will not be too light, otherwise it means that the materials are too unreal There are many particularly good panel furniture, the weight is comparable to solid wood furniture

In fact, now to buy furniture first to determine what plate to buy, and then look at the price and style, if the first choice of environmental protection, choose German imported EGGER plate, or dew river board Dew River is relatively cheap, environmental protection can also reach E0 level, but you have to choose the right brand, there are too many frauds,

Self-recommend this brand (Baida Bona Furniture), professional panel furniture manufacturing, mainly export-oriented, domestic in Tianjin, Panzhihua, Nanjing, Guiyang with a monopoly, online sales is the factory direct delivery of brand discount stores (Taobao).

It mainly depends on whether the surface of the plate has defects such as scratches, indentations, bubbling, degumming and peeling and glue marks; Whether the wood grain pattern is natural and smooth, do not have a feeling of artificiality; For symmetrical furniture, it is necessary to pay more attention to the consistency and harmony of the color and texture of the board, so that people feel that the symmetrical plate is like coming from a piece of material. The rationality and firmness of the connection points between each component of the furniture. If a piece of furniture is combined, its hardware connections should be of high quality, and the fit of the hardware itself and the fit with the furniture must be very ideal.

For furniture of the overall structure, each connection point, including the connection points between horizontal and vertical, must be tight, without gaps and cannot be loosened. Another example is surface treatment, where the open paint treatment, the wood grain, the brown eye of the wood must be presented, with a three-dimensional effect. Where the sealed paint treatment, the surface feels the best like the top coat of a piano, whether it is clear oil, mixed oil, matte, high gloss or flat gloss, the cleanliness, smoothness and hardness of the paint surface must be high.

Looking at the veneer, it is necessary to make the surface of the veneer flat and not blistered; There must not be any traces of complementary color on the veneer; The texture of the veneer is dense, there is no gap between the splicing and the splicing, the pattern should be accurate, whether it is on a plane or in the corner, in addition to the use of color difference, the color difference of the veneer on a surface should be very small. The production quality of the plate is mainly based on the quality of the saw, the decoration and surface decoration and the quality of the plate port. The better brand of panel furniture is Qumei Furniture, their new board experience is exciting special price The furniture packages in the event are all E0 imported plates, which are very environmentally friendly and healthy, especially during the event, the package purchase can also be discounted by 6%, and a set of living room furniture is less than 6,000 pieces.

The event ended on June 16.

How to choose panel furniture.

Panel furniture refers to furniture made of medium-density fiberboard or particleboard for surface veneer and other processes, which has the advantages of easy disassembly, diverse design, and not easy to deform. Due to the affordable price of panel furniture, panel furniture has been favored by most consumers.

1. Environmental protection: The environmental performance of furniture is mainly reflected in the board. At present, there are more E1 and E0 boards on the market, for consumers, because they cannot be seen with the naked eye, they have to see if the business has a certificate, and in addition, for the new furniture, there is no big smell.

2. The workmanship of the details

Good furniture depends on the details of workmanship, such as looking at hardware accessories, whether the edge sealing part is sealed, etc.

3. Plate quality:

The board is made of ash, which has a beautiful texture and is durable. If it is a plastic veneer, you should look at the side to see if there are any seams around the board surface. If it is a fine wood veneer, check whether the joints of the wooden strips are tight and whether the texture of the wooden strips is smooth.

4. Structural firmness

Gently push the furniture with your hands, if there is a shaking or creaking sound, it is not a strong structure.

5. Gap between active parts:

For example, door seams and drawer seams are better to have suitable gaps, and the fineness of workmanship can be seen from the suitability of these gaps.

6. Color: whether the color of the furniture is in harmony with the color of the indoor wall and floor.

Solid wood is better, and it's more environmentally friendly.

If you need it, I can help you, the wholesale furniture here is cheaper, and the price is generally several times higher when sold outside.

Buy here only for shipping.

Panel furniture: cheap, not easy to deform, cracking, but the smell is relatively strong, the life of use is relatively short, after a few years of use, there may be a surface (outside the veneer or sticker) into a piece of falling off, edge sealing off off, drawer (bottom plate) falling off, track (slide rail), drawer breakage, the above conditions may not all appear, but panel furniture often has problems.

Solid wood furniture: durable, environmentally friendly, lighter in taste, more solid in structure, and the hardware used is generally better than that of the plate type. However, solid wood is easy to crack and deform, and some large manufacturers will test the moisture content of the board, drying and other processes, which reduces the probability of deformation and cracking, and cannot be completely avoided.

What's more, the difference in climate between the north and the south may lead to deformation and cracking.

Each has its own advantages and disadvantages, and the choice is yours.

1. Pay attention to surface quality.

The wood-based panel furniture in the panel furniture is based on wood-based panels such as particleboard and medium-density fiberboard, and the surface is decorated with melamine, PVC, wood thin wood and paper wood grain and other veneer, and the imitation wood grain pattern is clear and natural, smooth and flat, with good visual effect and feel. When purchasing furniture, it is mainly to see whether the board on the surface of the furniture material has defects such as scratches, indentations, bubbling, degumming and peeling and glue marks.

2. Pay attention to the quality of production.

In the production of panel furniture, the formed panels are combined through sawing, decorative edge banding, and component assembly.

3. Pay attention to the quality of metal parts and plastic parts.

Metal parts and plastic parts are often used as fastening connectors in panel furniture, so the quality of metal parts also determines the internal quality of panel furniture. Metal parts are required to be dexterous, smooth, and have good surface electroplating treatment, without rust, burrs, etc., and the precision of the matching parts should be high. The plastic parts should be beautiful in shape, bright in color, and the strength and elasticity of the parts in use should not be too thin.

The opening connector requires flexible rotation, and the internal spring should be properly tightened, so that the furniture will be stable and easy in opening and use, and there will be no friction sound.

4. Pay attention to the main size.

At present, panel furniture in the market is mainly based on complete sets of bedroom furniture and office furniture. In addition, there are multi-functional film and television electrical cabinets and other products. The main dimensions (i.e., functional dimensions) of the furniture are required by the national standards.

For example, the large wardrobe stipulates that the space depth in the hanging wardrobe should be greater than or equal to 530mm, the distance between the upper edge of the clothes stick and the upper surface of the bottom plate should be greater than or equal to 1400mm, the specified height of table furniture is 680mm to 760mm, and the middle clearance height from the lower edge of the middle drawer of the desk to the ground height should be greater than or equal to 580mm, and the clearance height between the bookcase floors should be greater than or equal to 230mm to 310mm. The main size referred to above mainly refers to the need to pay attention to understanding when purchasing furniture, because if the furniture is smaller than the specified size, it will bring a lot of inconvenience when using and affect the use of furniture. If the depth of the large wardrobe space is too small, it will affect the hanging of clothes, resulting in the phenomenon that the door cannot be closed.

Nowadays, more and more families are buying panel furniture, which is very convenient to use. How to choose the board furniture to promote the reputation of the town? PChouse will take you to find out.

When choosing this kind of furniture, we must first check its veneer, there are three main veneer materials on the market, mainly divided into melamine veneer, solid wood veneer, cat's eye paper finish, fireproof board finish, etc. Among them, melamine veneer is scratch-resistant, high-temperature resistant, and water-resistant with strong practicability, and the texture style is diverse and three-dimensional. The solid wood veneer has a variety of styles, imitating the overall appearance of solid wood furniture.

Cat's eye paper veneer and fireproof board finish belong to relatively low-end finishes, and cat's eye paper veneer is cheap but less practical; The fireproof board finish is less environmentally friendly due to construction reasons.

Secondly, we should also pay attention to its edge banding, the quality of the edge banding process is not only related to the appearance of the product, but also related to the furniture environment. You should pay attention to the fact that there is no unevenness and warping phenomenon in the plate home. Furniture recommendations pay special attention to whether it is edged on all six sides.

At the same time, check its firmness, which is related to its service life. You can test its firmness from two aspects, one is the gap between the door cracks and drawer seams of furniture, if the gap is large, it means that the workmanship is rough, and it will be deformed after a long time; The second is a single box or a double box, usually, in addition to the outer layer of boards, the noisy section of the furniture should also be pasted with a layer of panels, which is called a double box, and the furniture of the double box is both beautiful and strong.

Finally, take care to look at its paint. For example, whether the pigment has streaks; whether there are cracks or bubbles; Whether the paint in the corners is too thick, etc. It's best to ask the salesperson how many coats of paint have been applied to the furniture. Of course, the more times you go on it, the better.