-
Anonymous users2024-01-24Basically, it's useless, you need to turn it off and empty the water tank when you're out on business or doing something for a long time... Otherwise, go home and stink you!
-
Anonymous users2024-01-23Tap water used to turn the toilet flush on or off.
-
Anonymous users2024-01-22It's the pipe that fills the toilet with water.
-
Anonymous users2024-01-21Once closed, your toilet tank won't be able to fill in.
Before connecting, first determine the size of your own toilet drain (that is, the distance between the drain and the wall), but also determine whether the product, accessories, and instructions you buy are complete, and carefully read the instructions to understand some product matters. 1. The drain is required to be handled by the installer smoothly, and the bottom outlet of the toilet should be equipped with a special flange for the toilet, or the glass glue should be applied evenly with the drain, and the bottom and surrounding of the toilet should be glued, and the gap between the toilet and the wall should be even, placed properly and steadily. 2. After the toilet is in place, it is required that there is no leakage in the water intake, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is stable. >>>More
The analysis is as follows:
Step 1: Remove the blue integral inlet valve on the left. >>>More
1. Try to tighten the screws on the outside of the toilet tank. >>>More
It's all on the left.
Before disassembling the toilet inlet pipe, you should prepare a water inlet valve set to be reinstalled, as well as items such as common screwdrivers. Then it is necessary to make preparations and turn off the water inlet switch under the toilet tank, so that no more water will enter it, so that the water inlet network pipe can be replaced later. It's no longer just about draining the toilet tank with water. >>>More
This means it's time for your system to be reinstalled, and this is the method I've used, so let's see if it's right for you. >>>More