-
Anonymous users2024-01-23It's all on the left.
Before disassembling the toilet inlet pipe, you should prepare a water inlet valve set to be reinstalled, as well as items such as common screwdrivers. Then it is necessary to make preparations and turn off the water inlet switch under the toilet tank, so that no more water will enter it, so that the water inlet network pipe can be replaced later. It's no longer just about draining the toilet tank with water.
Both ends of the water inlet pipe need to be installed, and the one end connected to the water pipe is the water inlet connected to the toilet. Therefore, before connecting the water inlet, it is necessary to make sure that the main gate of the water pipe must be closed.
-
Anonymous users2024-01-22Most inlet pipes are on the right side of the toilet (you are facing the wall against the toilet, which is your left).
The valve of the inlet pipe is at the top of the inlet pipe, when the water level of the water tank is low, the tap water will enter the water tank through the inlet valve, and when the water in the water tank rises to a certain level, the float that controls the inlet valve will be jacked up, and then the inlet valve will be closed. When the inlet valve is in the water, you can find its location by pulling the float by hand and looking at it.
If the equipment is plugged in, the water pipe is electrified, then focus on detecting the electrical appliance to see where it leaks. >>>More
The toilet inlet pipe is 4 pipes, and the specifications of ordinary faucets at home are 4 pipes, so you should know what size wrench is.
Close the triangle valve, turn the hexagonal nut of the water inlet pipe counterclockwise to remove it, and tighten it clockwise when replacing it.
The water inlet hose is leaking because it has been used for a long time, and it is enough to tighten it with a wrench.