How to repair the water spray at the screw of the water inlet pipe outside the toilet tank

The analysis is as follows:

Step 1: Remove the blue integral inlet valve on the left. >>>More

Before connecting, first determine the size of your own toilet drain (that is, the distance between the drain and the wall), but also determine whether the product, accessories, and instructions you buy are complete, and carefully read the instructions to understand some product matters. 1. The drain is required to be handled by the installer smoothly, and the bottom outlet of the toilet should be equipped with a special flange for the toilet, or the glass glue should be applied evenly with the drain, and the bottom and surrounding of the toilet should be glued, and the gap between the toilet and the wall should be even, placed properly and steadily. 2. After the toilet is in place, it is required that there is no leakage in the water intake, the water level is correct, the flushing is smooth, the switch is flexible, and the cover is stable. >>>More

Under normal circumstances, the water in the toilet tank does not flow back. Because the pressure rod in the tank will automatically crush the valve when the water is full, preventing backflow. >>>More

I don't know how to connect the water inlet pipe behind the Huida smart toilet, please read the manual carefully or ask an experienced person to install the connection.

Try adjusting the pontoon lower, if it still doesn't work, it may be that this assembly is broken and needs to be replaced with a new one.