-
Anonymous users2024-01-24The general method of repairing scratches has the following steps:
1: Bonding; First of all, clean and dry the adhesive surface, put the two parts neatly, use strong quick-drying glue along the crack while injecting the glue and vibrate with a blunt object, try to fill the gap with glue, and then release the excess glue at the crack after the glue is firmly glued.
2: Repair; After mixing with a small amount of AB glue, add a small amount of talcum powder and then adjust it into a sticky paste, try to smooth out the broken place, add water and sand to dry it and gently level it again.
3: Coloring; After selecting the paint and thinner material of the same color as the bathtub, brush it to the adhesive surface with a small oil brush, polish it with water sand after the oil is dry, repeat several times to observe the color and the overall similarity of the bathtub, and then brush the nitro varnish to complete it.
1. Read the manual and determine the punching position. Before installation, you should take a look at the installation instructions, although the shower is small, but there are many parts, it is not too much to browse the installation matters first. >>>More
It can be sawed, but the manual saw is not good for sawing, first of all, you have to make a cut for the saw blade to insert, then you can only find an electric belt, the hand grinder is good. If there is an edge, you can see it directly.
Advertising is relatively brittle, bathtub and shower room bottom basin heating extensibility is relatively strong, easy to blister molding, generally white.
In fact, when the shower room is installed, do not install a bottom basin, so that it is easy to grow insects if the cleaning is not in place.
Personally, I like the one with a base. There are two reasons for this: >>>More