The hot and cold water in the sink and kitchen are coming out normally, and the cold water pipe at t

Updated on Kitchen 2024-07-10
9 answers
  1. Anonymous users2024-01-24

    To give you a simple way to judge, if the hot water end of the mixing valve is normal, it is the cold water end of the valve core of the mixing valve is blocked, and it can be disassembled and cleaned.

    If the hot water end does not come out of the water, that is, there is no water in the cold water of the water heater, check whether the pressure limiting valve is blocked, because you said that the kitchen is hot and cold normally, do not consider the cold water valve of the water heater.

  2. Anonymous users2024-01-23

    View; The direction of the cold water pipe!

    Cold water outlet from the mixing valve --

    Check back! one by one; Shuncha!

    There must be a cut-off point!!

  3. Anonymous users2024-01-22

    Answer pro 1, the cold water pipe does not come out of the water may be: the cold water inlet valve is closed; Pipeline blockage elimination method: close the main water inlet valve, loosen the screw of the water inlet pipe under the water heater, open the water valve to see that there is no water, if there is no problem, tighten the water inlet end, and find out the water end in the same way;

    2. The water pressure is too small: if the floor is high, you may encounter insufficient water pressure, resulting in the water cannot be hit, and the water is very small. Ask someone to dredge the plumbing problem. It may be that the filter in front of the faucet is dirty, just unscrew it and clean it.

  4. Anonymous users2024-01-21

    If only the cold water pipe of the shower interface does not produce water, it should be resistant to assessment, and the water pipe is blocked or leaking.

  5. Anonymous users2024-01-20

    The hot and cold water in the sink and kitchen are normal, and the water pipe that goes to the rain does not come out, which may be that the main gate of the water pipe is not opened.

  6. Anonymous users2024-01-19

    You need to check whether the cold water pipe is blocked, you just need to remove the faucet and only put cold water to check.

  7. Anonymous users2024-01-18

    The hot and cold water in the kitchen is in and out normally, and the blood vessels of the people who bathe the interface do not come out of the water. I think it's because the pipe is blocked or what's the situation? You'd better look for a professional repairer and don't guess for yourself.

  8. Anonymous users2024-01-17

    The hot water in the hand and the kitchen is the symptom in the domain, this cold water pipe I don't know what's going on, it's yours to find a supreme. Your various shapes, there must be the relationship between the obligation interface, and you may not be able to leave it, it must be your jade. Just your cold water can't be piped, it's because the water in the bathtub is broken before, and the previous one was to this extent.

    There is no other place, it must be that the person who Ding Yujie left is broken.

  9. Anonymous users2024-01-16

    In your case, the valve of the cold water pipe is closed. It's better to try to find the valve, and if you can't find the valve, you can't solve the problem.

Related questions
6 answers2024-07-10

The kitchen faucet is mainly in the form of a bent pipe, which is a little higher in height and can be rotated, so that the space for washing vegetables is much larger. The basin faucet is not too high and does not rotate. In addition, both have hot and cold taps, single cold taps, and so on.

1 answers2024-07-10

The cold water valve is opened smaller, and you can try it at all angles.

2 answers2024-07-10

If there is no blockage somewhere in the pipeline, you can not solve it yourself, you can find the property department to assist.

2 answers2024-07-10

The water heater is leaking, and if it doesn't trip, your hands will be electrocuted.

3 answers2024-07-10

I think: 1. The pipe between the hot water pipe connected to the bathroom sink in your home and the mixing valve of the shower is blocked; 2. Your shower (mixing valve and above) or mixing valve is blocked, and the hot water pipeline is not working, resulting in no hot water at all, so if the water heater is not ignited, then there will definitely be no hot water; 3. It is also possible that although the pipeline is open, most of the inner diameter of the pipe is blocked by the raw material belt used for sealing when installing the pipeline or shower, so the water output is very small, resulting in a small pressure in the pipeline (the flow rate in the water heater is very small) and cannot be ignited, so there will definitely be no hot water.