-
Anonymous users2024-01-24Bathroom tile interface treatment: bathroom tiles with waist line and tiles should be thought about in advance, and other things should not be blocked or conflicted in the future. If you use toner to match the color of tile grout, it is best to debug a little first, and then decide the amount, otherwise it is either too light or too dark.
Living room tile interface treatment: grout is now mainly divided into sand and no sand on the market, generally speaking, paving bright wall tiles and vitrified tiles are suitable for using sand-free, paving matte tiles and antique floor tiles are suitable for sand. There are two ways to choose the color of the grout, one is the proximity method, which selects the grout that is close to the color of the tile, and the second is the contrast method, where the color forms a strong contrast with the color of the tile.
Generally, the time of joint selection is 24 hours after tiling, that is, after the tile is dry, the joint time is too early, which will affect the tiles, resulting in unevenness or loosening and falling off. In addition, before hooking, it is necessary to clean up the dust and debris in the cracks of the tiles.
-
Anonymous users2024-01-23You haven't said whether the tiles used in the two rooms are the same, and if they are the same, they don't have to be separated.
-
Anonymous users2024-01-22At the junction of different tiles, you can paste an aluminum alloy or white steel edge strip to make a transition.
-
Anonymous users2024-01-21Passage stones, stone or over-treated with metal strips!
This tile adhesive is really magical, I use a liquid tile adhesive called Yucan tile adhesive at home, the bonding strength is really incomparable, and then there is no problem with drilling holes on the tile, the general normal construction is to do brushing on the waterproof tile, if you want to stick firmly, you can apply a layer of adhesive on the waterproof without brushing. Hopefully this answer is satisfactory.
Remove all the caulk in the bathroom, then use water to make a water paste, fill the gaps with a scraper, compact, and remove all the mud around the loss. After drying, wipe the surface with a damp dry cloth, cure thoroughly, and moisten it to see if there is any water leakage. The problem of water seepage in the gap bridge type is basically a poor seal, or a loose tile. >>>More
Generally, there are more tile shops in larger tile stores, so you can ask more.
First of all, it is necessary to determine whether the bathroom tile is leaking or the water pipe is leaking. >>>More
Water seepage treatment can be carried out with invisible waterproof liquid, and the specific operation steps are as follows: >>>More