How to deal with the tile joints in the bathroom

Remove all the caulk in the bathroom, then use water to make a water paste, fill the gaps with a scraper, compact, and remove all the mud around the loss. After drying, wipe the surface with a damp dry cloth, cure thoroughly, and moisten it to see if there is any water leakage. The problem of water seepage in the gap bridge type is basically a poor seal, or a loose tile.

It is necessary to remove loose tiles and re-paste them.

<> used to make caulks or white cement for joint repair. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean.

As a substitute for the caulk, the beauty sewing agent has the characteristics of easy scrubbing, dirt resistance, no falling off, and beautiful appearance. It is the first choice for filling gaps by Honda owners, and the beauty joints in the bathroom also have a great effect on preventing water from seeping through the gaps in the tiles.

There is no tile gap to do beautiful seams, just look at the caulk is not the slightest water blocking effect, which is why, the bathroom, obviously waterproof, the wall on both sides of the bathroom will still be anti-alkali, not waterproof is not done, but sometimes the toilet water consumption is large and penetrates into the sand and dust, because there is sand and dust to block the water can not be emptied in time, it will penetrate from the cement sand dust to the wall outside the bathroom to cause anti-alkali, you bathroom to do beautiful seams, you can effectively prevent this situation.

><> a house is generally lived in for 10 to 20 years, do you want your tile gaps to be as bright as new, or let it be?

After the tiles in the bathroom are pasted, the gaps between the tiles need to be grappled, and the specific methods are as follows:

Hook the seam material.

1) The materials commonly used in grout are mainly cement, grout, putty powder, etc. Among these materials, putty powder and white cement are more traditional materials, and now they are used more as jointed materials, mainly balcony cultural bricks, such as paving balcony tiles, and ordinary cement mortar can also be used directly.

1) putty powder, white cement waterproof performance, scrub resistance is poor, now, in the process of home decoration, in the kitchen and bathroom wall floor, living room floor tile joints are generally not used, now basically choose professional tile caulk (also known as grout).

Types and selection of grouts.

1) grout is now mainly divided into sand and no sand on the market, generally speaking, paving bright wall tiles and vitrified tiles are suitable for sand-free, paving matte bricks and antique floor tiles are suitable for sand.

2) There are two ways to choose the color of the grout, one is the proximity method, which is close to the color of the tile, and the second is the contrast method, which forms a strong contrast with the color of the tile.

Selection of the time of the hook seam.

Generally, the time of joint selection is 24 hours after tiling, that is, after the tile is dry, the joint time is too early, which will affect the tiles, resulting in unevenness or loosening and falling off. In addition, before hooking, it is necessary to clean up the dust and debris in the cracks of the tiles.