-
Anonymous users2024-01-24Washbasin sewer installation method.
Ensure that the basin and basin drainer are installed;
Unpack the purchased basin drain pipe;
One end of the basin drain pipe is specially connected to the basin drainer, and the plastic head at this end is unscrewed;
If the old washbasin drain has not been aged and the model is the same as the new washbasin drain, it can continue to be used.
It should be the quality of the product, because the PVC elbow you said is formed by injection molding, when the injection molding process is unreasonable (pressure, temperature), the mold glue design is unreasonable (position, size), the raw material formula is unreasonable (too much calcium carbonate, too little plasticizer) and so on, there are handover marks in some parts of the elbow, and this part is the most vulnerable place of the product. The same batch of products in the same place. PVC is more acidic, and general detergents are more alkaline. >>>More
You can install a basin leak, my home was also a washbasin drain some time ago, and the Shangshanjie basin leak installed later, the effect is very good, you can try.
Material: load-bearing screws, hand drills, soft rulers.
1. Find the location of the washbasin on the wall first >>>More
There will usually be a reserved sewer drain that can be used as a washbasin drain if there is no other purpose. If you want to make other reserved drains, you need to reconsider a tee, keep this mouth and turn the elbow into a tee pipe, you can find a suitable place to place the washbasin (wash basin) at will.