-
Anonymous users2024-01-24The sealing ring should be similar to the material of cement, and the toilet bowl will be deformed and sealed after being pressed.
-
Anonymous users2024-01-23Change the gasket layer.
They are all connected, but the pool outlet has a trap, which can form a water seal and anti-odor string, and the toilet drain pipe is straight.
The reason for collecting water is to avoid direct leakage of gas inside.
Sealing flange installation of toilets:
Flip the toilet bowl over to determine the center on the toilet drain and draw a cross center line. Align the toilet drain with the cross line of the ground drain outlet, keep the toilet installed horizontally, and press the sealing ring tightly, and then install the anchor screws and decorative nuts. >>>More
These two small holes are indeed used to fix the toilet, but now many people use cement mortar to fix the toilet when they install it, so the small holes are useless, and you can ask the installer to block the small holes with white cement.
It takes three hours to test the water by playing glass glue, but the air balloon is stuffed into the tube to pump the air, and the water is tested to see if there is any leakage there! Just try it out and find out, (that's the balloon for the pipeline-specific test).