-
Anonymous users2024-01-24Put the suction cup directly into the drain in the toilet, grab the wooden handle of the suction cup and press it down, just try it!
-
Anonymous users2024-01-23No, just use your hands. Rattle.
-
Anonymous users2024-01-22Just press down firmly on the drain. Press it and put it down, and use the suction generated by the ups and downs to open the blocked toilet pipe.
-
Anonymous users2024-01-21Is there an instruction manual? There is the best instruction manual.
It's better to ask Mom, I haven't used it either...
-
Anonymous users2024-01-20Facing the drain, press down, and then pull up. But at this time, there must be water, otherwise there is no suction.
-
Anonymous users2024-01-19You didn't feel any air being squeezed out when you pressed it down??
Is the water level in the toilet or squatting pit relatively low? It is recommended that you squat in the pit or in the toilet bowl to store more water, preferably when the suction cup can be submerged by the water. In this way, it is easier to inhale the air if it is isolated.
If someone else has it, if you don't, you can find a lock, 100 to get it,
The mobile phone is flooded, first of all, it should not be picked up and used, the battery speed should be removed, the place where it should be blown is made with a hair dryer, and the motherboard power supply is easy to burn, if you change the motherboard, it will generally account for one-fourth or one-third of the cost of buying a mobile phone, at present, it is recommended that you do not turn on the phone now, first get a professional mobile phone repair to see and then consider.
I believe that many people will encounter the problem of bathroom odor in real life, and many people don't know how to deal with the bathroom sewer odor. Bathroom sewer odor has an impact on the entire indoor environment, many people may think that it is the cause of the toilet, but in fact, there are many reasons for the smell of toilet drain. So what to do about the smell of toilet drains? >>>More
What's that? Solution: First, plug the toilet mouth with a towel. >>>More
First close the water inlet pipe, remove the hose, remove the toilet, you can find the water pipe to flush from the back to the front, and then put the toilet back, with the wall white glass glue glued to the hour can be used, but be careful, 24 hours to completely dry.