What needs to be done before tiling the bathroom

1 All 1Waterproof and moisture-proof materials: there is often a lot of water and fog in the bathroom, and the tiles should have a good waterproof and moisture-proof function, that is, the water absorption rate should be low.

2.Closed water test before tiling: Before laying tiles in the bathroom, the ground and wall must be waterproofed, and the closed water test must be carried out (generally need to be done twice), and then paved after ensuring that there is no leakage, otherwise, after paving, the leakage phenomenon can only be scraped off and re-paved.

3.Tile after changing the water circuit: Under normal circumstances, the renovation involves changing the water circuit, and the floor tiles and wall tiles must be laid after the change work is completed and confirmed.

4.The rougher the wall, the stronger the sticky: It is best to rough the wall before tiling, so as to increase the contact area between the cement and the wall.

Usually you can use an electric drill to drill some pits on the wall, or roll the glue on the wall first, and then throw the cement water onto the wall, after the cement solidifies, it will be potholes, and then you can paste the tiles.

5.Make full use of tools: when tiling, the bricklayer must be required to pull the line, and supplemented by a level, no matter how good the bricklayer's craftsmanship is, how good it feels, he must be resolutely required to use tools to control the quality.

6.Timely use of glue: When pasting the wall of the bathroom pipe, in order to increase the adhesion, L 08 glue should be added to the normal cement mortar.

7.Prevent hollow drumming: after two or three hours of tile pasting, you can tap the four corners of the tile, and you have to knock it piece by piece, and you must rework when you hear the sound of empty drum, otherwise it is easy to cause the tile to crack when you punch holes in the tile due to the installation of things in the future.

8.Do not change the pipeline: The pipes in the bathroom should be avoided as much as possible, otherwise it is easy to destroy the waterproof layer and cause leakage.

9.Increase the slope of the ground: The floor of the toilet must be sloped to the floor drain, so that the water on the ground can be drained from the floor drain.