Is the bathroom decoration still tiled?

1. All bathrooms will be drenched almost every day, so it is a perennial humid place, so when decorating, we must pay special attention to the selection of bathroom floor tiles, so today I want to talk about those things about bathroom floor tiles!

1. Choose bathroom floor tiles with low water absorption.

Good quality tiles, the water absorption rate is very low, the low water absorption rate means that it can dry quickly, and the tiles with low water absorption rate can be known by doing a test. Drop the water droplets on the back of the tile, and after a few minutes observe the diffusion of this water stain, the less absorbent the tile, the lower the water absorption rate of the tile.

2. Choose high-density floor tiles for the bathroom.

When we choose bathroom tiles, we should observe whether the brick surface is smooth from the side, and we can also tap it by hand to hear whether the sound is crisp, the crisper the sound, the higher the texture density and the better the hardness of the tile.

3.Choose tiles with a thicker glaze for the bathroom.

The floor tiles of the bathroom are still thicker glaze, because after the glaze layer is worn, the brick surface is not good-looking, and the second is difficult to take care of, easy to hide dirt and dirt, and it is not safe, and it is easy to slip when drenched with water. Therefore, do not choose bathroom tiles with a thin glaze layer, they will not last long in the humid environment of the bathroom, and the bricks can not be dried for a long time will also lead to the appearance of mold.

There are many ways to treat the bathroom wall, because the wall only needs to pay attention to waterproofing, and there is no requirement for wear resistance. It doesn't have to be tiled, but you can also paint the wall or stick it to the wall.

Epoxy paint.

The most economical way is to brush epoxy resin paint, with a variety of colors, as long as the concrete base surface of the wall is made flat and flowerless, the brush effect will be very good, and the construction is also very simple, you can brush it yourself. Although this kind of lacquer has a strong smell when brushed, it generally disappears within 1 hour, and there is no environmental problem.

Latex paint cannot be used in the bathroom, even if it is waterproof latex paint used in the dry area, it will not last for 5 years at most, let alone in the wet area.

Fair-faced concrete.

If you want to do fair-faced concrete style, it is recommended to redo the concrete base surface. Workers are asked to polish with emery paper, and then use high-grade cement or high-quality interface agent for treatment, and repeat several times, and finally clean with water, brush transparent water-based epoxy resin after drying, and then repeat the grinding and cleaning again. However, this method is time-consuming and material-intensive, and the cost is even much more than pasting high-end tiles.

Fiberglass cement.

It can also be pasted with cement fiber board, which means that the wall needs to be fixed.

Pasted this must be posted.

If you don't put tiles, you can't do it waterproof.