-
Anonymous users2024-01-241. What is the reason why the toilet bowl does not stop being watered?
1. Problems with the water tank.
You can check the material of the water tank, or whether the parts are too old, there are many types of toilets on the market now. But none of us can guarantee that some small manufacturers or unscrupulous merchants will produce some inferior toilets, so we can't judge its quality from its appearance.
Therefore, it is necessary to check from the inside, to check its internal parts, because some small parts are relatively unused, and it will not take long to be damaged.
2. The problem of sewer pipes.
We can't eliminate the phenomenon of continuous leakage of water on the toilet, which may be due to the sewer pipe, because the function of the sewer pipe is to connect the main conveying pipe of the toilet tank, which is also very likely.
3. Problems with drain valves.
The drain valve is a part that controls the water tank, and the reason for the non-stop flow of water may also be due to a problem with the drain valve, cracking or deformation during installation, or uneven or not careful enough on the installation surface.
Second, the solution.
1. If it is found that the problem is caused by the water tank, then the water tank should be disassembled, and the parts of the water tank should be inspected one by one to see if they are in good condition, and some parts that cannot be repaired should be replaced; If the problem is too severe, it is advisable to replace the entire tank to avoid further problems in the future.
2. If it is because of the sewer pipe, then you should check the interface of the sewer pipe as soon as possible to see if there is any looseness, or the pipe is blocked or damaged, and check one by one. If the pipe is rotten and needs to be replaced, if it is due to the joint, it should be fixed with a material similar to iron wire.
-
Anonymous users2024-01-23If the float valve is lifted and the water stops, it means that the water supply is not broken. If the water is full and flows out of the overflow pipe, it means that the water level is too high, and it is good to lower the floating water level. Lowered the water a little and stopped.
-
Anonymous users2024-01-22If there is a problem with the sewer pipe, check whether the sewer connection is loose or damaged. If the water pipe is rotten, it can be replaced with a new one. The waterway connection is loose, and the interface position is fixed with materials such as iron wire.
It doesn't matter, there should be an angle valve before connecting the toilet, but if it doesn't work, you can turn off the water in the toilet! >>>More
My family used to be like this, you open the back of the box, there is a lid inside... Usually the overflow is because the lid attached to the ball is not properly covered, you can see that it is good to wait until it is covered.
If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.
Is the toilet tank inlet an electric water pump? Ordinary toilets are water-pressure inlet valves, which do not require electricity.
In this case, the float valve in the tank is not closed tightly, the second is that the drain ring in the tank is damaged, and the third is that the screw of the drain in the tank is not tightened.