Diagram of the working principle of the toilet

Updated on Toilet 2024-05-24
2 answers
  1. Anonymous users2024-01-24

    The pontoon uses buoyancy to pull the lifting rod to block the water inlet, after manually pressing the water discharge, the pontoon sinks, the lifting rod begins to release the water again, and the pontoon is raised with the water surface and finally makes the lifting rod block the water inlet, so circulating, mechanical principle.

  2. Anonymous users2024-01-23

    Question: My toilet has been changed, from the toilet to the urinalHow long the meter is, will the toilet be blocked after installing the toilet, and the dirt will not be clean.

    Nowadays, the toilet is directly installed on the squat, can it be used to make the field?

    Answer: Yes, but you must first knock out all the protruding places on the surface of the squatting toilet, and the pipe of the drain should also be raised a little higher with a drainage pipe, and then fill the empty space in the squatting toilet with cement, and then buy a suitable toilet according to the distance of the hole. Pay attention to the seal when installing to avoid leakage.

    After the question is changed, it flows horizontally to the mouth of the toilet more than a meter away, that is, it was originally blocked, and the merchant came to see him when he installed the toilet and said that he could, and he explained to me that the road chief is the same as the chimney length, and the suction power will never be blocked, is this so, please inform.

    When he asked the question, he did not fill in the original inlay space, but put the seal on it, I installed the original urinal tank, and then I put the toilet tank water and then flushed it with the original water tank, and now it looks like it can be.

    Thank you for your answer, I'm very satisfied, thank you!

Related questions
6 answers2024-05-24

It is the opening and closing effect of the float valve to control the water flow, you can find the float valve on the Internet, you can understand it more intuitively.

4 answers2024-05-24

The sofa bed is folded because the seating shelf and the backrest shelf are connected by two iron joints, which are designed in the same principle as the pedals of a bicycle. It can only go in, and the pressure will be pushed back, and at the end of the pressure there is a switch to release the joint that is resisted, so it will return to the original flat lying. >>>More

3 answers2024-05-24

The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

1 answers2024-05-24

Recommend answers for me, the toilet asks a lot of questions, I don't know what the truth is? >>>More