Does the toilet work?

The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

The buoyancy is used to block the small hole through the lever, and the black water-stopping rubber pad has the same external water pressure, but the action area of the black rubber pad (harder place) is larger than that of the catheter outlet, so the water outlet hole is blocked and the water stop is realized.

The "pumping" of the flush toilet refers to the S-shaped bend under the toilet, and when the water surface in the toilet exceeds the high point of the S-bend, the siphon phenomenon is formed, which can pump the water and dirt of the toilet together. Until only a small amount of water remains, the siphon destroys, leaving a small amount of water, forming a water seal. >>>More

The sensor receives the signal, the motor works to drive the reducer, and the cover plate is opened.

Rely on the float to stop the water in the inlet valve; The drain is lifted by pressing the switch or the old-fashioned cable switch, so as to form a siphon to let the water flow out quickly, a large amount of water enters the toilet bowl beyond the toilet drain S bend height, and the drain forms a siphon, which quickly takes away the internal dirt, and after the water volume is reduced, a small amount of water is left to seal the S bend hole to prevent the drain from smelling out.