The toilet suddenly doesn t run out of water, what s going on?

If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.

There are several reasons why the toilet does not get water:

1.Determine the water supply and angle valves and hoses first.

2.The small filter inside the lower end of the inlet valve body is blocked.

3.The inlet valve has been adjusted by itself, resulting in improper adjustment.

4.The quality of the inlet valve itself.

You can open the toilet lid to check whether the float sinks to the bottom when the tank is empty, if it is still above when there is no water, it means that the float is broken, and it cannot sink and the upper water outlet is always closed, so there is no water.

You can also check whether the triangle valve is open, remove the triangle, check whether the end connected with the inner wire in the wall is blocked by the raw material belt, whether the valve core of the empty triangle valve is open and closed normally, whether the water hose is smooth, and the same kind of exclusion can be done.

1. The lever or float of the water supply component is stuck.

The lever in the toilet bowl water component is the transmission device, however, in the process of long-term use of the toilet, some scale or dirt may be attached to the activity point of the lever, making it not so sensitive, or even stuck, which also includes the float is also easy to stuck, that is, the float has been floating, in this case, the toilet inlet is sealed, and it cannot be automatically watered.

2. The outlet of the water supply component is blocked.

The water outlet of the toilet water supply component, you may not have seen it, it is a very small opening, mainly for easy blocking. Although the water flow rate will be relatively large due to the small spout, it will still be blocked by some scale or dirt if it is used for a long time. The water outlet is blocked, and even if the inlet valve is opened, the water will not come out, and the toilet will naturally not be flooded.

One is the storage of water at the bottom of the toilet after the toilet is flushed.

This part of the water storage, flush toilets and siphon toilets are available, mainly to block the odor from flooding and filth regurgitation.

Of course, because of this part of the stored water, you should be careful when pooping, as if the current goes straight down to 3,000 feet, there will be water droplets on your buttocks...

The amount of water stored in the toilet is related to the design, and it is said that removing the water replenishment hose in the toilet tank can reduce the amount of water stored, but I haven't tried it, I don't know if it's true or not.

The second phenomenon of toilet backwater refers to the fact that after the tap water is stopped, the pressure is 0, at this time, the downstairs uses cold water, and the water in the upstairs toilet tank will pour into the cold water pipe.

This phenomenon is unique and can only occur if the toilet filling valve is damaged.

Nowadays, many families use blue cleaning blocks to clean and disinfect toilets, but this industrial preparation is harmful to the human body, so once it is found that the running water is blue, you should stop eating it, find out the reason, and see if the water in the toilet tank is flowing into the water supply pipe.

In response to this problem, you can install a check valve on the toilet inlet pipe to prevent the water from flowing back in the tank, or you can buy a toilet anti-backflow angle valve, which is in place in one step and more worry-free.

Eliminate whether the water has stopped.