-
Anonymous users2024-01-24The base leakage is easy to do, just use glass glue to make another circle.
Weak, one is that the water level of the water tank is low, just turn it up.
If the toilet is not smooth, it is not blocked, so try to dredge it.
-
Anonymous users2024-01-23Use a wallpaper knife to cut the base of the toilet, remove the toilet, and reinstall the sealing flange. The key point is that when reinstalling, it is necessary to align the toilet outlet with the sewage pipe on the ground, otherwise the deviation will leak, so that the toilet drain is weak, and the principle is that the water will naturally form a negative pressure in the pipe under the action of gravity to produce "pumping".
First check if there is a blockage, if there is a dredging, if there is no adjustment of the pressure, you can adjust the water level a little higher.
Toilet flushing slowly, powerless, no whirlpool? Move this small mechanism in the water tank, easy to solve, practical.
The side handle chain of the side-press and side-wrench toilets is long, which causes the water-stopping pad to stop the water quickly, although it moves. Solution: Please shorten it to the appropriate level. >>>More
Congratulations that your toilet is not blocked yet.
<> toilet leaks as soon as the flush base is flushed: 1. The toilet installation problem occurs when the toilet is flushed, and the toilet leaks when it is flushed, which is that the toilet is not sealed at the beginning of the installation of the toilet, and some netizens buy the toilet from the Internet and install it themselves, and the flange and the toilet drain are not aligned well when installing the toilet, and it will naturally leak out of the toilet base when flushing. >>>More