The toilet flushes without whirlpools and drains slowly

Congratulations that your toilet is not blocked yet.

When the amount of water in the water tank decreases, it will lead to the phenomenon of weak flushing of the toilet bowl without whirlpool, and when this problem occurs, it is necessary to find a solution according to the different types of toilets.

If it is a top-press toilet, it is mainly due to the change in the length of the pressure rod, which causes the water stop pad to reset and stop the water quickly, at this time, we only need to open the water tank cover, reverse it, loosen the pressure rod nut, and adjust the length of the pressure bar to the appropriate one.

The low water level of the inlet valve is also an important factor that causes the toilet flushing to be slow and powerless without a whirlpool, the solution is to remove the inlet valve, remove the inlet valve buckle, turn the inlet valve body counterclockwise, adjust the height of the body according to the corresponding length, and then rotate the inlet valve body clockwise. And install the buckle, install the inlet valve, connect the filter and the inlet pipe, so that the problem is solved.

If the smoothness of the ceramic glaze of the toilet wall is not enough, it is easy to hang dirt, the toilet can not be flushed, which is generally the quality of the product, the material of the glaze is not good, try to choose a well-known brand when buying a toilet, the glaze is relatively smooth, and the quality is more guaranteed.

Second, how to solve the problem of toilet flushing power.

The water level of the inlet valve is too low to cause the water to be weak, correspondingly to remove the inlet valve, remove the buckle and turn it counterclockwise, properly adjust its height, and then rotate the inlet valve body clockwise to install the filter and the water inlet pipe, so that it is OK.

The toilet is blocked, resulting in weak flushing, at this time, you can use a dredge dredger, or find a longer plastic water pipe, one end is connected to the tap water, the other end is plugged into the toilet mouth, the toilet mouth is blocked with rags and other things, open the tap water, use water pressure to dredge the pipe, if the problem is serious, the toilet must be disassembled to dredge, this situation can only be solved by getting things out.

There is too much dirt in the toilet, the ceramic is dirty, if it is not cleaned in time, it will lead to weak flushing, it is recommended to use some baking soda powder or white vinegar to clean, it is not recommended to use steel wool balls and decontamination powder, etc., which will cause damage to the glaze of the ceramic.

Clogged or the toilet itself is poorly designed.

It may be that there is not enough water in the toilet tank, and adjusting the water inlet properly and raising the water level will enhance the momentum.