-
Anonymous users2024-01-23Molded doors and solid wood.
Door difference 1, natural solid wood insulation and sound absorption.
Pure solid wood door: It is made of natural logs from the forest as the door core, which is degreased and dried, and then processed by blanking, planing, tenoning, drilling, high-speed washing and other processes. Most of the pure solid wood doors are made of precious wood, such as cherry, peach, walnut, rubber wood, golden teak, oak, etc., which have the characteristics of no deformation, corrosion resistance, no splicing joints and heat insulation. At the same time, the solid wood door has good sound absorption and effectively plays a role in sound insulation.
The relative moisture content of high-grade solid wood doors is about 8%, which is not easy to crack and deform, and the service time will be longer. However, because it is made of natural log whole material, it has disadvantages such as relatively large color difference and small shrinkage joints.
Solid wood craft doors.
The door core is mostly made of pine, fir, etc., with MDF or Liu'an board pasted on the outside, and the veneer is made of solid wood veneer, which is made after high temperature hot pressing, and the edge is sealed with solid wood lines. High-grade solid wood craft door, the core of the door is mostly high-quality fir wood, and the surface is hot-pressed with 45-60 silk natural veneer (equivalent to more than three times that of veneer). Due to the small density of fir and the easy control of moisture content, the finished door has good stability and is not easy to crack and deform.
In addition, the solid wood craft door also has the characteristics of heat preservation, impact resistance, flame retardant, etc., and the sound insulation effect is basically the same as that of the pure solid wood door.
2. High-density simulation of molding molding.
The molded door is made of two pieces of high-density fiber molded door skin with modeling and artificial wood grain by mechanical pressing. The manufacture of molded door panels is made of wood from plantations, which is peeled, sliced, screened, ground into dry fibers, mixed with adhesives and paraffin, and then molded at high temperatures. From this process, molded doors also belong to plywood doors, but the panel of the door is made of high-density fiber molded board.
The splint process is light in quantity and low in price.
The ordinary plywood door is made of wood, perforated board, high-density board, etc., the flat part on both sides of the door is glued to the frame with decorative panels, and the groove part is pasted with wood veneer or paper bark, which is processed. This kind of door is light in quality and low in price, but limited by the process, the surface color difference is large, and the door can only be pasted with veneer, paper or nailed with wooden strips around the edge.
It depends on the individual needs of the owner.
1. Solid wood wardrobe door. >>>More
This is not certain, relatively speaking, solid wood is more environmentally friendly, but it is also difficult to ensure environmental protection, because as long as there is glue, there will be formaldehyde, formaldehyde exceeds the standard, it is not environmentally friendly. If you want to say environmental protection, wood-plastic materials are more environmentally friendly, and the current wardrobe brands are basically using wood-plastic materials, such as Daxin wardrobes.
At present, there are two main types of interior doors on the market, one is molded door, and the other is solid wood composite door. Molded doors have been generally popular in the past few years because of their beautiful shape and low price. However, with the gradual improvement of people's awareness of environmental protection, the molded door began to be gradually neglected, because it was made of two fiberboards cold-pressed, and the formaldehyde content in the fiberboard was relatively high. >>>More
The molded door is made of MDF and polymer board pressed by mold under certain conditions, and the middle filler has honeycomb paper, styrofoam, high-density slats made of lattice and wood square; The surface is laminated, painted, and decolorized. Among them, the solid wood composite door contains a molded door. The solid wood composite door is made of MDF, plywood and other sandwich wood, and its cost is different depending on the material, which is very greasy.
Doors made of molded door panels are molded doors. Wood from plantations is peeled, sliced, screened, ground into dry fibers, mixed with phenolic glue as a binder and paraffin, and molded at one time under high temperature and pressure. The core of the solid wood composite door is mostly made of pine, fir or imported filling materials, etc., and the veneer of MDF and solid wood is pasted on the outside, which is manufactured after high temperature hot pressing, and the edge is sealed with solid wood lines. >>>More