How to install the insulation drying rack on the balcony

Updated on Balcony 2024-05-28
4 answers
  1. Anonymous users2024-01-24

    2. Because of the insulation layer, the drying rack can only be on the four corners, with an extended screw rod, and then the drying rack is installed and hidden on the four screw rods.

    3. The length of the expansion bolt used in the installation of the drying rack depends on the thickness of the temperature layer of the protection hall, and the expansion bolt with a length of about 100 mm is generally used.

    4. Because the installation of the drying rack of the insulation layer needs to be cautious, if you can't install it yourself, you can also find a professional master.

  2. Anonymous users2024-01-23

    2. Because of the insulation layer, the drying rack can only be on the four corners, with an extended screw rod, and then the drying rack is installed on the four screw rods.

    3. The length of the expansion bolt used in the installation of the drying rack depends on the thickness of the insulation layer, and the expansion bolt is generally about 100 mm long.

    4. Because the installation of the drying rack of the insulation layer needs to be cautious, if you can't install it yourself, you can also find a professional master.

  3. Anonymous users2024-01-22

    Use the extended expansion bolt to hit the wall for fixing.

  4. Anonymous users2024-01-21

    The installation requirements are not difficult, the length of the drying rod: the longest meter on the market, the shortest can be cut according to the size of the balcony, the installation requirements of the hand crank: the solid wall is the best, because the weight will be concentrated in the position of the hand crank Yin Xunzi when the clothes are dried, if the installation of Chang Xian is absolutely sharp in the position of the tile, it is required that the tile can not be left with a hollow drum, otherwise it is easy to break the tile when drilling and later use, and the installation requirements of the top seat:

    Most of the top seats of drying racks on the market are composed of decorative covers and fixed pulleys. The original roof (reinforced concrete) installation is the best, but there are also cases of suspended ceilings, so I will carefully talk about this piece of current decoration for the pursuit of beauty and other reasons, many people will do a certain modeling treatment for the balcony, that is, the ceiling.

Related questions
2 answers2024-05-28

Yes, our house is so safe, you just buy it, and their installers can help you install it for free.

1 answers2024-05-28

Generally speaking, the bowl has a circlip or pin that is left on top of it.

2 answers2024-05-28

1. Measure the position of the hand that needs to be installed in any corridor of the first-hand installation hand, use electric drilling, install the expansion rubber plug, and tighten the manual place. >>>More

4 answers2024-05-28

The light line has a switch control, if the switch is disconnected, the light is not on, and the electric drying rack has no electricity. In this way, you have to turn on the lights during the day to lift the drying rack, which is inconvenient, so you have to pull the fire wire from the front of the light switch, and pull the zero line. >>>More

2 answers2024-05-28

Go to Taobao to buy a simple one, and when you don't use it, you can put it away without taking up dozens of dollars.