Can the toilet pit be 300 if it is 280 away?

Is it okay to buy a toilet with a 330 hole spacing of 350 pit spacing?

No way. Because your sewer hole is 330 from the main town, it means that the distance from the center of the sewer pipe to the wall is 330. And if you buy a toilet with a pit spacing of 350.

As a result, the pit distance of the toilet is greater than the pit distance of the sewer pipe 20, which causes the misalignment of the toilet and the sewer pipe, and the water of the toilet tank flows out at the dislocation. At the same time, the smell in the sewer pipe will also leak from the misalignment.

No, the pit distance refers to the distance between the center of the toilet sewer pipe and the back wall of the toilet, and the pit spacing of a new house is generally 300mm or 400mm. The pit spacing must be determined as soon as possible, otherwise you will not be able to set your own toilet.

The determination of the pit distance should also fully consider the thickness of the bathroom tiles, otherwise the toilet may not be installed. When choosing a toilet, if you are going to decorate and paste tiles, you must measure the pit distance after tiling, otherwise there will be a problem that the toilet will be bought back and cannot be installed.

The toilet pit distance is the distance from the center of the toilet drain to the wall. However, when taking measurements, remember not to ignore the thickness of the wall tiles. Typically, wall tiles are 6 8 mm, plus the thickness of the putty layer, about 10 20 mm.

For example, the manufacturer's seat mark is 400mm pit distance, which is basically 380mm distance, and the manufacturer reserves 20mm for the thickness of the tiles.

Most of the pit spacing after tiling is between 300 and 400mm, so when choosing, 300mm between 300 and 400mm is used, and 400mm is used between 300 and 400mm.

With the improvement of the economic level, people's living standards continue to improve, and more and more people have their own houses, but the decoration of the room makes many people who don't know how to do it a headache, especially the bathroom. Decoration specific to this object will involve someone asking "Can a 280 fit a 300 toilet pit spacing?" The answer to this question is obvious, of course not.

Can 280 be fitted with 300 toilet pit distance? If someone asks you this question, you have to figure out what the pit distance is before answering the question. Many people know very little about pit distances.

In fact, the distance between the center of the toilet downpipe and the wall is the pit distance, so 280 means that the distance between the center of the toilet downpipe you want to install is 280mm, not 300mm. The toilet pit distance is obviously 20 mm, so this is absolutely unacceptable.

If you want to solve the question of "can 280 be equipped with 300 toilet pit distance", you must know how the pit distance is derived, it is very convenient to buy a suitable toilet after cleaning the pit distance, you can measure it yourself directly, or ask a neighbor, because the unit is the same, so the pit distance is the same. In addition, under normal circumstances, it is best to increase the gap of 10-20mm according to the fixed pit distance during the decoration process. This gap is left for wall laying.

In order to avoid small mistakes in the renovation.

However, is there a way to fix a similar toilet spacing problem in the bathroom. We can only knock out part of the wall behind the toilet and insert the toilet into the wall. Wall tiles can be repatched later, and while it can affect the appearance, it's also a way to do it.

This is no problem, the error of 2cm can be borrowed, don't worry;

Note: Most of the finished toilet holes sold on the market are 300 or 400; Other sizes are also available, but they are very rare and difficult to find.

THE TOILET PIT DISTANCE OF 280MM IS NOT ABLE TO INSTALL A 300MM TOILET, THE SIZE IS NOT THE SAME, EVEN IF IT IS INSTALLED, IT IS NOT STABLE, YOU DON'T WANT TO BE SLOPPY, AFRAID OF TROUBLE, LET THE STORE CHANGE A 280MM, GOOD QUALITY TO USE FOR MANY YEARS!

Yes, no problem.

However, how many pit distances can be selected from ordinary toilets, and there are just 280.

If it is a smart toilet, it can be installed with a pit distance of 300.

I don't dare to say other brands, I myself am DeHeaton smart toilet can.

The toilet of 300 refers to the distance between the sewer eye and the center of the wall is 300, and I think the pit distance of 270 also refers to the distance from the center of the wall, so there should be no big problem, no need to add a shifter or other treatment, because the toilet sewer hole is generally about 50, because the pit is generally 100, there are 20 of 30 adjustable, as long as the installation is careful, there will not be much problem.