-
If the faucet leaks, it should be caused by a long-term switch, and there is wear and tear inside, so it can no longer be repaired, and you can only change a faucet.
-
Kitchen faucet leaking, probably due to the faucet contact is not particularly tight, you can remove it, tie a little raw material tape, see if it will be better, if it still doesn't work, you should ask a professional to check it for you.
-
Hello, this is the faucet hot and cold valve core is broken, maintenance needs to disassemble the handle and the inside of the cap, it is still difficult to operate by yourself, it is recommended to find a decoration master to repair and replace.
-
1. Close the sluice gate of the house.
To avoid unnecessary hassle before replacing the faucet, be sure to close the sluice gate in your house to avoid water spraying.
2. Wait for the residual water to drain out.
After the sluice gate is closed, wait a while to make sure that the remaining water in the tap has been drained before proceeding, and of course, you can also use paper towels or towels to absorb water directly to save time, and the drainage progress can also be accelerated.
3. Pry open the protective sheet.
After the water is drained, you can operate, use a knife to pry the protective piece on the faucet handle, this step is relatively simple, because this protective piece is generally directly put on or glued on.
4. Unscrew the screws.
Shine on the corresponding model of screwdriver, look in the direction, and unscrew the screws of the faucet handle.
5. Remove the faucet.
The faucet can be removed after the screw is unscrewed, and the faucet handle is generally fixed by occlusion tooth patterns, and it can be removed with force.
6. Complete the disassembly.
After the faucet is removed, the lower hinge can be opened to achieve disassembly, after the disassembly is completed, the relevant tools should be sorted out in time, and the disassembled things should be put away.
-
Turn off the main valve and remove the faucet to take a look.
-
There's a big nut under the basin, buy a new one and replace it.
-
Downstairs is right, this is a small problem, a man will fix it.
-
Leaking faucets. Buy a new one. It would be nice to reinstall it.
-
The faucet is leaking and the repair is simple. As long as it's a man, it's going to be repaired.
-
Close the inlet valve, buy a new one, and replace it.
-
I really don't know how to find a plumber to help you take a look, the water leakage should be the reason why it is not tightened, try to screw it yourself.
-
It doesn't matter if the kitchen faucet is leaking, now there is a waterproof tape to stick on.
-
Close the main valve, remove the broken one with a wrench, and install a new one.
The nut below is easy to loosen, loose is easy to leak, tighten it, if not, change the leather gasket. >>>More
Step 1: Prepare your tools first: screwdriver, wrench, pliers. >>>More
As shown in the figure, the circle shows the decorative cup, and when it is twisted open, you will see the gland (usually a copper or stainless steel hexagon nut gland) pressed against the valve core. After removing the gland with a wrench, check whether the internal structure of the valve core is damaged, and it is recommended to replace the valve core with a new one.
1. The Tuanji Bureau closed the sluice gates of the houses. >>>More
The kitchen faucet hose is generally the first to fix the faucet of each part of the rubber pad, from top to bottom into the hole of the water cold, and then use a hollow flange child near the bottom of the faucet at the end of the faucet to tighten the connection with the disc body is strong and firm, and then tighten the interface at the bottom of the hose clockwise.