How to dismantle the kitchen faucet at home?

1. The Tuanji Bureau closed the sluice gates of the houses.

To avoid unnecessary hassle before replacing the faucet, be sure to close the sluice gate in your house to prevent water spraying.

Second, the residual water is drained.

After the sluice gate is closed, you should wait a while to make sure that the remaining water in the faucet has been drained before proceeding, of course, in order to save time and save time, you can also use paper towels or towels to absorb water directly to speed up the process of draining the celery.

3. Pry open the protective sheet.

After the water is drained, you can operate, use a knife to pry the protective piece on the faucet handle, this operation is relatively simple, because this protective piece is generally directly put on or glued on.

Fourth, unscrew the screws.

Shine on the corresponding model of screwdriver, look in the direction, and unscrew the screws of the faucet handle.

5. Remove the faucet.

The faucet can be removed after the screws are unscrewed, and the faucet handle is usually fixed by biting the tooth pattern, so it can be removed with a little force.

Sixth, complete the disassembly.

After the faucet is removed, the lower hinge can be opened to achieve disassembly, and after the disassembly is completed, the relevant tools should be sorted out in time to put the disassembled things away.

Step 1: Prepare your tools first: screwdriver, wrench, pliers.

Step 2: Remove the small screws on or behind the faucet handle and remove the handle that is fixed to the faucet body. Some faucet screws are hidden under metal buttons, plastic buttons, or plastic sheets, and as soon as you open the buttons, you will see the handle screws mounted on the top.

The screws of a faucet that have been used for a long time may become very tight due to rust and other reasons, and some lubricating oil can be dripped into it. Step 3: If the screw is hidden in the hole, it is recommended to observe it with a flashlight first, mainly to see what the fixing screw inside is, the cross or a word, and then use the corresponding screwdriver to loosen.

This screw of a few brands of faucets is an inner square hole (such as Moen), which is more troublesome to remove, and special care should be taken not to damage the screw mouth when using alternative tools. When the screw is released, the handle can be removed. Step 4:

At this time, you see a large copper nut, and after removing the nut with a large wrench, you can remove the valve core of the faucet. Observe whether the copper plane under the spool is uneven or whether there are fine sand grains, and remove it.

1. The first step is to prepare the required tools, the required tools are pliers, wrenches and screwdrivers, if you only need to replace the faucet parts, then you also need to prepare the parts that need to be replaced, and then turn off the main valve.

2. Remove the small screws behind or above the faucet, remove the handle fixed on the faucet, some faucet screws are installed under the plastic sheet, plastic button or metal button, in this case, you only need to open the button to remove the handle screw installed on the top of the faucet.

3. If the screws of your faucet are installed in the hole, you can first use a flashlight to see whether the screws inside are slotted or cross-mouthed, and then use the corresponding screwdriver to disassemble them. Some faucets use inner square hole screws, which are a little troublesome to disassemble, and you must pay attention not to damage the screw mouth during the disassembly process.

4. After removing the nut with a movable wrench, you can remove the valve core of the faucet. After removal, observe whether the copper plane under the valve core is uneven or sandy, and if so, it should be clear and clean.

Extended Materials. What to pay attention to when replacing kitchen faucets.

1. Some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drop the oil on the rusty place, and then take out the basin faucet.

2. Single-hole faucet is a kitchen faucet commonly used in many families, and the place to pay attention to in installation is to complete the basic fixing, and the installation screws of the faucet need to be fixed to avoid loosening of the faucet.

3. When installing the thermostatic water short, one thing to note is that the faucet water pipe is divided into two types: hot and cold, and it is necessary to distinguish the installation when installing, do not mix it, otherwise the faucet will not be able to produce water, in addition, don't forget to install the hot and cold water filter.

1. Close the sluice gates of the house.

To avoid unnecessary hassle before replacing the faucet, be sure to close the sluice gate in your house to prevent water spraying.

Second, the residual water is drained.

After the sluice gate is closed, wait a while to make sure that the remaining water in the tap has been drained before proceeding, of course, in order to save time, you can also use paper towels or towels to absorb water directly to speed up the drainage process.

3. Pry open the protective sheet.

After the water is drained, you can operate, use a knife to pry the protective piece on the faucet handle, this operation is relatively simple, because this protective piece is generally directly put on or glued on.

Fourth, unscrew the screws.

Shine on the corresponding model of screwdriver, look in the direction, and unscrew the screws of the faucet handle.

5. Remove the faucet.

The faucet can be removed after the screws are unscrewed, and the faucet handle is usually fixed by biting the tooth pattern, so it can be removed with a little force.

Sixth, complete the disassembly.

After the faucet is removed, the lower hinge can be opened to achieve disassembly, and after the disassembly is completed, the relevant tools should be sorted out in time to put the disassembled things away.

1. Kitchen.

How to dismantle bai's faucet is to prepare tools: screws and wrenches and pliers

If it's just to replace the faucet parts, then the right is ready.

Okay this part and then close the main valve. Then remove the small screws on or behind the faucet handle, and then remove the handle that is fixed to the faucet body. Some faucet screws are hidden underneath metal buttons, plastic buttons, or plastic sheets, and when you open the buttons, you will see the handle screws mounted on the top.

For faucets that have been used for a long time, the screws may become very tight due to rust and other reasons, so you can drip some lubricating oil into it.

2. If the screw is hidden in the hole, it is recommended to use a flashlight to observe first, which is mainly to see what the fixing screw inside is, a cross or a word, and then use the corresponding screwdriver to loosen. The screw of a few brands of faucets is an inner square hole (such as Moen), which is more troublesome to remove, so special attention should be paid not to damage the screw mouth when using alternative tools. When the screw is released, the handle can be removed.

At this time, what you see is a large copper nut, and after removing the nut with a large movable wrench, you can remove the valve core of the faucet. Observe whether the copper plane under the spool is uneven or whether there are fine sand grains, and it can be completely removed.

The kitchen faucet soft pipe generally needs to be fixed by adding rubber pads to each self-part of the faucet, penetrating the water cold cavity from top to bottom, and then using a hollow flange child near the bottom of the faucet at the end of the faucet The thread buckle is tightened clockwise and connected with the disc body is strong and firm, and then one end of the hose is screwed clockwise with the interface at the bottom of the faucet.

How do you dismantle a kitchen faucet? You can easily replace the kitchen faucet by yourself.

There is no need to disassemble the other fittings, put the two hoses from the angle valve.

Twist it counterclockwise, take out the whole dragon power head, and then grab a hose and twist it out counterclockwise from the bottom of the dragon's head.

Twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grasp one hose and twist it counterclockwise from the bottom of the faucet.

Twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grasp one hose and twist it counterclockwise from the bottom of the faucet.

There is no need to disassemble other accessories, twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grab a hose from the bottom of the faucet and twist it out counterclockwise.

Extension: Faucet.

A faucet is a valve that controls the flow of water. The upgrading speed of faucets is very fast, from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control, now in many families, stainless steel double temperature double control faucets, but also the emergence of kitchen combination faucets. Nowadays, more and more consumers will consider the material, function, shape and other aspects of faucets.

You first have to turn off the main water gate, and then you have to see what kind of faucet you have, some of which are under the basin.

The screws are twisted back, so the answer is to twist the screws first, there is a more ancient style that is to directly twist the beginning of the faucet.

1. The interface is rusty and difficult to remove: when the faucet in the bathroom is disassembled, at least the connection at the inlet pipe is easily separated. In the kitchen, whether it is the water inlet connection or the connection between the faucet and the countertop, the interface in both places is difficult to unscrew.

2. Use a saw to cut off the faucet above the countertop: although oil is dripping at the interface, and then twisting it vigorously, after more than ten minutes, the interface is still not moving, so you can only continue to use the saw to violently disassemble. The kitchen countertop is not like the bathroom countertop and cannot be removed, so the faucet above the countertop can only be sawed off first, so that the faucet is separated from the countertop.

3. Use a saw to separate the water inlet pipe and hose: because there is no problem that the water inlet hole and the hose cannot be separated when installing the bathroom faucet, and at the same time, it is a bit difficult to connect the new hose to the water inlet hole after sawing if it is directly sawed. After thinking about it for a long time, I finally referred to the hardware store owner to provide a solution.

He thought that if he couldn't unscrew it with dead force, the only way to cut it was to saw.

MLGB I've been doing it for more than 2 hours, bai just these 2 hoses du I can't get it down I smashed the faucet dao in annoyance and exposed the copper pipe that is specially connected to the hose inside, and screwed it dozens of times rather than come down I'll pull it hard and smash it hard, the sink is broken Pull out the hot and cold water pipes below, and the countertop made of floor tiles is also smashed, which saves trouble You can justifiably find someone who sells the sink to reinstall it, in order to save a little money to make yourself tired, and there is the possibility of injury, and in the end it is not good, It's better to find someone to repair it directly, the specialty is not right, the tools are not complete, and you should think about repairing things.