-
Anonymous users2024-01-23The nut below is easy to loosen, loose is easy to leak, tighten it, if not, change the leather gasket.
The water pressure at your red arrow is very small, if the hot and cold water are leaking, it is the problem you are pointing at, but there are few problems there; If only cold water (or hot water) leaks, the rubber gasket of the gate valve is broken.
-
Anonymous users2024-01-22Remove the faucet, go to the store that sells water and electricity accessories, buy a roll of raw material tape, wrap it on the silk mouth (wrap it a few more times), and it's OK to put it on The raw material belt is very cheap about 2 yuan.
-
Anonymous users2024-01-21You can find some thin hemp rope or thin wire rope and wrap it around a few times in the slot where the screws are screwed, and then screw it on, I hope it will help you.
-
Anonymous users2024-01-20Change one, Kohler's is good, but it's a little more expensive, find the property management, they will handle it with you.
It usually costs about 100 yuan to repair the faucet at home, and it is estimated that the property will be about 50 if it provides paid services.
Please buckle the red and blue logo on the valve, remove it with a screwdriver, and then you will understand how to open it.
1 Water leakage at the water outlet.
Kitchen faucet leakage, encountering a water outlet leak, is caused by the wear of the axial gasket inside the faucet. The solution to the leakage of the water outlet: use pliers to loosen the gland and remove it, take out the axial gasket with a clip, and replace it with a new axial gasket. >>>More
Step 1: Prepare your tools first: screwdriver, wrench, pliers. >>>More
This is caused by the wear of the ceramic plate of the valve core, and if the other quality of the faucet is not a problem, you can choose to replace the valve core. >>>More