How do you change the chandelier in the bathroom? It s the round kind

The joints between the old floor drain panel and the tile are separated by a screwdriver or other tools, and the cement around the floor pie is raised with a screw, and then the floor drain is struck with a small hammer to separate it from the cement; Use a groove to clean the cement layer around the old floor drain pit, pay attention to the drainage pipe needs to be temporarily plugged, and use Yinxian Tan to prevent debris from falling into the drainage pipe, resulting in the blockage of the drainage pipe.

Because the lights in the toilet are basically put together with our bath bomb, it is necessary to buy a special lamp when replacing it. As long as this good group lamp is sold in any hardware store, and then open the lid of our bath bomb, its 4 corners will be unscrewed or 4 screws of orange socks, and then the bad lamp is unscrewed, the good lamp is installed, and then the cover on the bath bomb can be buckled.

You go to the store where you bought the partition and explain the situation, and it is estimated that they will help you remove and reinstall it. >>>More

The maintenance of the ceiling light generally requires some electrician skills, if you do not have it, you can ask a professional collector to repair it. First of all, you need to turn off the power, then untie the fixture of the bulb from the top, remove the old bulb, Doushi install the new bulb, install the fixture, and finally turn on the power to test whether it is on.

1. Replacement steps:

1. Remove a piece of gusset next to the lamp (with a suction cup or a sticky hook); >>>More