-
Anonymous users2024-01-23The setting of the slope of the indoor drainage pipe is different from the slope of the outdoor drainage pipe, and the indoor design is relatively more complex, so it is generally not calculated separately in the sub-region and direction, but a specific value is taken to directly determine the slope of the drainage pipe. Such a drainage pipe slope is generally clearly stipulated in the acceptance specifications and other related documents, in the interior decoration, the owner and the design and construction personnel must understand the relevant acceptance specifications, determine the standard value of the relevant drainage pipe slope, the minimum slope value and the specification spacing between the fulcrum, in order to better complete the smooth design of indoor drainage. The slope of the drainage pipe is related to the material of the drainage pipe used, generally speaking, the pipe made of cast iron is larger than the plastic drainage pipe due to its large friction coefficient, so when designing the slope of the drainage pipe, the design of the slope is greater than that of the plastic drainage pipe.
Generally speaking, the slope of indoor drainage pipes should be controlled between 25% and 30%, and the specific values should refer to the corresponding specifications. For the slope of the drainage pipe of the bathroom, it is generally set at about 2%, and the slope should be set as small as possible, if the slope is too high, it may bring inconvenience to the use of other related parts of the bathroom.
-
Anonymous users2024-01-22Generally speaking, the slope of indoor drainage pipes should be controlled between 25% and 30%, and the specific values should refer to the corresponding specifications. For the slope of the drainage pipe of the bathroom, it is generally set at about 2%, and the slope should be set as small as possible, if the slope is too high, it may bring inconvenience to the use of other related parts of the bathroom.
-
Anonymous users2024-01-21It can't be high, it's just a little bit. The water always flows from a low place. It is also convenient to clean at some low point.
The water pipe in the garage can't be moved, and if you look closely, you will find that there are maintenance holes left in the elbow of the good head. >>>More
The minimum sewer pipe has to be 110, and no matter how small the debris is, it is easy to block.
Enthusiastic netizens. The slope of the ground of the bathroom is generally between 1 and 3, mainly to consider the location of the floor drain, such as the floor drain in the middle of the room, the slope water can be appropriately smaller, if the location of the floor drain is more partial, the slope water is appropriately larger. According to the principles of traditional Chinese Feng Shui, the floor of the bathroom should not be higher than the floor of the bedroom, especially the position of the bathtub should not have a feeling of being high. >>>More
It's a bull's horn problem, you get in, as long as the two pipes are not interconnected, why should you care.
Abstract Hello, first find the leakage point, if the sink pipe is leaking, just remove the water pipe at the leakage directly, and replace the new water pipe. If there is a leak in the wall or underground pipe, the water pipe pressure test should be carried out first to detect the leakage point, and then the leaking wall should be excavated and replaced with a new water pipe. >>>More