What to do if solid wood furniture cracks

Usually solid wood furniture in the process of transportation and use inevitably have some bumps, coupled with the continuous change of moisture content, especially in the autumn, tables, chairs, countertops often appear some cracks. The cracks must be repaired in time, which can hinder or delay the occurrence and development of these damages, so that the service life of solid wood furniture can be extended.

The autumn breeze is blowing and the climate is dry, which can make many people feel uncomfortable. For solid wood furniture, it is also faced with the trouble of autumn dryness, through the high temperature and humidity of the whole summer, the replacement season of summer and autumn, the volume expansion coefficient and moisture content of the wood will change sharply and then cause the cracking of the wood.

Some of the cracking is related to the wood fiber of the material itself, which is also unavoidable. To this end, Kinway Human-Friendly Furniture has developed 5 measures to enhance the strength, tensile strength and stability of solid wood.

1. Add solid wood strips.

Prevent deformation of solid wood;

2. Add steel bars.

Enhance the tensile strength of solid wood;

3. Add grooves.

Relieves the tension of solid wood;

4. Lengthen the screw hole.

Mitigating changes in tensile force;

5. Add "S" type card slot splicing.

Enhance the firmness of the flattening.

Solid wood furniture cracking solutions:

The first type: prepare some scrap.

discarded old newspapers, then shredded with special scissors; Add alum and pour it into a container, add a small amount of water and stir well; Then put the container on low heat and cook it into a paste, stirring constantly throughout the cooking process; The mixture is then filled into the cracks of the solid wood furniture, waiting for it to dry naturally, and finally the color is applied with a paint pen or correction pen for that kind of furniture, which is roughly the same as the furniture as a whole.

The second type: prepare sawdust of the same kind of wood, to the kind of very fine sawdust, preferably the kind of powder, add a certain proportion of imposition glue or 502 to mix, stir; Then use a batch of ash shovel to apply to the cracks, apply them several times, and then use sandpaper to polish the filling and surrounding, and finally the paint color, completely restore the cracks to the original appearance of the furniture.

Precautions for solid wood furniture:

1. Keep away from heat sources such as heaters.

2. Reduce the ventilation time of opening windows.

3. Reasonable indoor humidification.

Solid wood furniture copy

The phenomenon of cracking is the first place.

Due to the climate of bai, the alternation of four seasons a year will inevitably lead to a greater or decrease in the humidity in the air, which will cause a lot of solid wood furniture to shrink and shrink, resulting in cracking. Another point is that many workers in the processing of wood, the use of cutting corners may also make solid wood furniture cracking, as well as the usual use and maintenance is not correct, there will also be cracking.

After the following six processes, the problem of cracking of solid wood furniture is quickly compensated:

1. Prepare some waste newspapers and cut them into scraps with scissors.

2. Participate in appropriate alum in the confetti and mix evenly.

3. Pour the mixture of confetti and alum into the container prepared in advance, add a small amount of water, and mix again.

4. Place the container on top of the simmer and cook into a paste. During the steaming process, it is necessary to mix constantly.

5. Fill the boiled paste mixture into the cracks of the solid wood furniture and let it air dry.

6. Use a paint pen or a special furniture correction pen to paint the color on the supplementary area to make it harmonious with the color of the whole furniture.

See what color paint you use, you can find a painter in the furniture city to get it, cracked realistic wood home.

There is such a phenomenon, go buy some wood glue powder, use 400 fine sandpaper to polish the cracked position smooth, there is a more obvious seam position to pour the wood glue powder into it, first fill it flat, and then drop 502 glue to penetrate into it, and wait for it to solidify after leveling with sandpaper, and then reconcile the color you want, use flannel to rub it up, don't worry, slowly layer by layer, wait for the color to be almost the same, and then put a layer of varnish on the surface.

The placement of solid wood furniture should avoid direct exposure to strong light, and do not get close to the furniture when using heating and fireplace heating in winter to prevent the furniture from fading and cracking. Secondly, it is necessary to keep the room ventilated and dry, and do not let the wooden furniture always be in a humid environment, so as to avoid mildew of the furniture. If the climate is particularly dry, you can sprinkle the furniture with a little water to prevent warping.

Northern homes can install humidifier instruments to regulate and maintain indoor humidity to protect furniture.

Cracking this phenomenon is mostly caused by the loss of moisture in the wood, not to achieve its protective effect, the way to rescue is to implement protective measures, such as subtle cracking (gap width within 2mm) without affecting the use and appearance of the case can be used to repair the special crayon for furniture, such as affecting the use, appearance needs professional maintenance!

It has to be returned to the factory, because the cracking of the solid wood home must be glued together from the new, and the glue of the solid wood furniture, unlike other homes, is generally not good at sticking, so it must be returned to the factory.

It is best to return to the factory, followed by going to the local furniture market to find a master who repairs solid wood furniture to repair it at your home. If you can't help it, buy some latex and stick it yourself, no matter how good it is, it's useless, and it's the key to solve the problem in the most convenient way. It's best to find a master to get it done, and I can also give you a little paint repair.

The cracking of solid wood furniture is mainly due to the lack of nourishment of oil, and the teak oil extracted from the teak body should be wiped after processing, and the teak oil extracted from the teak body should be regularly wiped according to the maintenance process.

If it is a brand of solid wood furniture, it is good to find a manufacturer to deal with it, and do not dispose of it at will.

Cracking of solid wood furniture is affected by a variety of factors, in life, we should do a good job of maintenance of solid wood furniture to avoid cracking of solid wood furniture, let's take a look at what to do if solid wood furniture cracks.

1. Care for essential oil maintenance.

Because the care essential oil can lock the moisture in the solid wood furniture, it is necessary to use the care essential oil to maintain the solid wood furniture from time to time, use the care essential oil to lock the moisture in the wood, prevent the solid wood furniture from drying out and deforming, and at the same time can nourish the solid wood furniture, so that the solid wood furniture from the inside to the outside radiates brilliance, and prolong the service life of the solid wood furniture.

2. Clean and wax.

In order to better prevent the cracking of solid wood furniture, we can wax and maintain solid wood furniture, wax once a quarter, solid wood furniture looks brighter, and can also prevent cracking and deformation of solid wood furniture, solid wood furniture waxing is to maintain the protective film on the furniture, avoid damage, affect the moisture content of solid wood furniture, otherwise it will crack.

The cracking of wooden furniture is mainly caused by dryness and moisture volatilization, and maintaining the humidity of the space (using a humidifier) can effectively alleviate and reduce the cracking and deformation of solid wood furniture.

I think that the furniture is damp for a long time, which will make the furniture wood expand, which will lead to deformation, I agree with the statement upstairs, find a beautician to help you solve it, there is no need to return to the factory, but also to avoid the change of temperature difference, I hope my answer is useful to you.

The cracking of solid wood furniture must be glued together from scratch, and the glue of solid wood furniture, unlike other home furnishings, is generally not good to stick, so it must be returned to the factory.