The faucet connector on the kitchen wall is not properly connected, causing the water to flow direct

Updated on Kitchen 2024-03-11
4 answers
  1. Anonymous users2024-01-23

    It is useless to find the leak for treatment.

  2. Anonymous users2024-01-22

    If you don't connect, use a PPR tube to melt it to make the water cage dragon pan outward, and adjust the angle, so that there will be no water leakage! (Doing aqueous water is destructive, labor-intensive, time-consuming, and costly).

  3. Anonymous users2024-01-21

    The structure of the floor slab! Just make sure that the faucet doesn't leak!

  4. Anonymous users2024-01-20

    Remove the faucet and reprocess the connectors.

Related questions
Is the water in the kitchen faucet really cleaner than the water in the toilet faucet?
1 answers2024-03-11

Water quality and water pressure are exactly the same, they are two pipes separated from one main pipe, both from the main pipe.

The kitchen faucet is turned on with another faucet, and then the kitchen faucet switch is leaking h
5 answers2024-03-11

Such a leak can be repaired if the handle of the faucet can be disassembled, and it is a broken rubber pad inside.

The water from the kitchen faucet stinks and the toilet smells
1 answers2024-03-11

The water odor is caused by the sewage being in the elbow pipe for a long time, and the toilet is not smelly because the siphon phenomenon takes away the sewage and forms a water seal.

The bathroom toilet faucet is not water, and there is water in the kitchen, what is the problem
3 answers2024-03-11

Toilet faucets?

See if there is an angle valve on the inlet pipe, and whether the angle valve is closed? >>>More

What to do if the kitchen faucet is too high and the water splashes out
11 answers2024-03-11

Step 1: Wipe the spout of the faucet clean.

>Step 2: Prepare an unused floor drain plug (round above, flat below). >>>More