-
Anonymous users2024-01-231. Clean up items and water;
2. Remove the drawer and buckle it upside down;
3. The cabinet door is opened, and the furniture moves more than 10 cm away from the wall;
4. Do not get in direct sunlight, take the shade to dry, you can use a fan to shake the head of the blow.
5. The ground and wall should be damp as soon as possible, so as not to affect the moisture of the furniture in the future.
6. Do not put items in the furniture before it is completely restored, otherwise it is easy to deform and difficult to recover.
7. Do not disassemble the furniture, otherwise it is easy to deform and cannot be installed.
-
Anonymous users2024-01-22Look at what color paint you use, find a lead in the furniture city to check a paint master can get it, cracked real wood furniture has no such phenomenon, go buy some wood glue powder, use 400 fine sandpaper to polish the cracked position smooth, there is a more obvious seam position to pour the wood glue powder in, first fill it flat, and then drop 502 glue to penetrate into it, and wait for it to solidify after leveling with sandpaper, and then reconcile the color you want, rub it up with flannel, don't be in a hurry to bend Huai, slowly layer by layer, When the color is almost the same, just put a layer of varnish on the surface.
The toilet has been on the water solution:
1. You can check whether the flush switch is restored to its original state, because the flush switch in some toilets is easy to wear out after being used for a long time, or it is stuck, so it cannot be restored. Typically, the switch can be reset by repeating it a few times. >>>More
Specific methods to remove 502 glue from furniture:
1. In the place where there is 502 glue, drip China Resources high-efficiency glue remover, this process is very important, you need to let the liquid stay on the surface of the glue, otherwise there is no way to soften it. If it is a façade, you can first drop it on a cotton swab or paper towel and then apply it to it. In this way, the liquid will not flow around. >>>More
1. Reason: If you find that the toilet inlet valve has not stopped the water, you need to slowly drain the water in the toilet tank until the place where the drain falls. Then look with the naked eye to see if there is any leakage in the flushing area. >>>More
How to deal with leakage of toilet inlet valve.
1. Check whether the flush switch is reset. The plastic flush switch of some flush toilets has been worn for a long time, and occasionally there will be a phenomenon that it cannot be reset, if it cannot be reset, then it can be switched on and off several times, so that it can be reset. There is also to check whether the rubber gasket of the drain port under the ball valve is aging, the sealing is not tight, etc., and if the problem is found, it should be replaced, so as not to affect the use. >>>More
See if there is a main valve, there will generally be a main valve for water intake, and you can change it to a good one after it is closed.