-
Anonymous users2024-01-24It's best not to do it yourself, waterproofing is serious and professional, and it's a headache to stick the bricks in the leakage.
1. Of course, you can do it yourself, the main details are to deal with the ground dust and cement blocks first, and then use the plugging treasure to do a special treatment of the pipe root, floor drain and wall corner, the wall corner is the yin and yang angle to make an arc, the pipe root and the floor drain mouth is best to open a U-shaped small groove to fill the leakage treasure, and then do a waterproof coating primer to further deal with the floating dust and impurities on the ground. After 2 hours of drying, a large area of waterproof paint is painted 2 times, and after 8 hours of drying, put some water to do a water avoidance experiment, 24 hours to see if there is a leak downstairs, and finally it is to do cement and interface agent to paste tiles, and the above is the construction process. >>>More
According to your description, you should buy K11 waterproof slurry, this material only needs to mix the liquid and powder according to the proportion, and you can't add water or cement sand, otherwise it will affect the final waterproof effect. Here are some of the more common construction methods: >>>More
It's okay to make your own waterproofing! But you must pay attention to the details of waterproofing, if you don't do a good step, there will be water leakage!
Make your own waterproofing and brush polyurethane waterproof paint. >>>More
No one should use SBS membrane to do waterproofing in the bathroom... Waterproof paint is recommended.