Bathroom brick free waterproof method, brick free waterproofing material works well

Updated on Bathroom 2024-10-02
2 answers
  1. Anonymous users2024-01-24

    Recently, it has been rumored that there is a method of waterproofing bricks in the bathroom, pouring the waterproof material into the bathroom, and the waterproofing can be done without removing the tiles.

    First, the bathroom without smashing bricks waterproof method.

    1. Cut off the water source and waterproof.

    First of all, it is necessary to find the place of water seepage and make the water pipe buried under the tile into an open pipe, so that even if the water pipe is broken, as long as the water source is cut off, it will not leak, and it can also play a waterproof role.

    2. Net cement waterproofing.

    Clean the gaps between the tiles, especially the cement joints that can be seen in the bathroom, and then use the net cement and clean water to mix evenly, use a brush to dip the net cement, and evenly brush into the clean gaps, which can be smeared several times, so that it can also have a waterproof effect.

    3. Professional leakage plugging products are waterproof.

    Similar to the second waterproof method, first clean the gaps between the sanitary tiles and the tiles, and clean the cement joints in the bathroom.

    Second, is the waterproof material of brick-free effect good?

    1. The method of avoiding smashing bricks and waterproofing in the bathroom is used to block water seepage and leakage, let's take a closer look. Putting aside the issue of environmental protection, the brick-free waterproof material flows into the mortar layer through the tile gap, and the saturation of the bathroom itself is already very high, and the continued use of mortar can not fully enter the seepage layer, even if it enters a small amount of mortar, the waterproof effect is relatively low.

    2. The first thing to know when using the method of smashing bricks and waterproofing in the bathroom is to find out the location and cause of the water leakage, so that there is a way to solve it by smashing bricks. The maintenance plan without smashing bricks must also be designed according to the different environments of the bathroom, and the construction materials with different properties should be used to achieve long-term waterproofing of the bathroom!

    Summary: The method of avoiding smashing bricks and waterproofing in the bathroom cannot solve all the problems of water seepage in the bathroom, but a reasonable plan must be designed according to the water seepage. The above about the method of smashing bricks and waterproofing in the bathroom and whether the anti-smashing water skiing materials are effective, you can refer to the following.

  2. Anonymous users2024-01-23

    There is a certain effect, but only a small part of the water leakage can be solved.

Related questions
1 answers2024-10-02

After the leakage of water in the bathroom, the first reaction of the owner is to search for the news about the bathroom brick-free waterproof plugging material, the rapid development of the Internet makes the transmission of information faster than ever before, the news about such products on the Internet is overwhelming, resulting in the bathroom without smashing bricks waterproof plugging materials, so how should the owner get from a lot of information can completely cure the bathroom leakage problem of the bathroom brick-free waterproof plugging material? >>>More

2 answers2024-10-02

Water leakage, but also fundamentally can be completely controlled, water leakage is generally divided into two kinds: >>>More

3 answers2024-10-02

Brick-free waterproofing is a relatively fast waterproof treatment method, leakage nemesis brick-free waterproofing effectively avoids a large amount of construction waste generated by brick smashing maintenance, is a new type of efficient kitchen and bathroom leakage maintenance materials.

13 answers2024-10-02

This is unreliable!

Do not smash the floor tiles to judge the severity of the bathroom leakage, is a slight water leakage, the bathroom does not smash the tile with waterproof paint is reliable, after all, the waterproof material without smashing the brick can prevent the bathroom slight leakage, can also play a certain waterproof protection effect. >>>More

1 answers2024-10-02

If it is caused by the leakage of water in the gaps between the tiles, then the use of Shuyu waterproof kitchen and bathroom special invisible waterproof liquid treatment will definitely solve the problem, so as not to smash the tiles. But if it is a pipe problem under the tile, it is estimated that it cannot be solved without smashing the tile, and it is necessary to knock on the tile to repair the pipe. However, water leakage in the gaps of general tiles accounts for the vast majority of cases.